User's Manual

PS-3 – Commissioning

3 PS-3 – Commissioning

Here you can find information about what needs to be done after switching on the

PocketServer in order to make the device ready for operation.

3.1 First connection

To connect the PocketServer to a smartphone or other mobile device for the first time,

follow these steps:

► Switch on PocketServer

► On your mobile device: activate WLAN

► Open list of available WLAN networks

► The PocketServer network is named LOG-PS3-ID-******

If this network is not in the list, it must be added. To this end, look for and open the

option ‘Add network’ (or a similarly named setting) in the WLAN settings. Enter the

‘SSID’ of the PocketServer as network name and confirm. The SSID can be found on

the type plate.

► Select the PocketServer network in the list.

► Login using the password 12345678. You can also find the password (PW) on the

type plate.

The mobile device is now logged into the WLAN network of the PocketServer. In the

status bar of the mobile device, the WiFi symbol should now be visible.

► Open Internet browser and open the following URL: http://192.168.2.1

This URL can also be found on the type plate. Alternatively, you can scan the QR

code on the type plate.

The user interface of the PocketServer is now displayed on the mobile device.

You can create a quick-start button for the PocketServer on the start screen of your

mobile device. This makes the PocketServer user interface easier to open next time.

► In the browser menu bar look for and open the option ‘Add to start screen’ (or a

similarly named setting).

First step: Create a

WLAN connection

Second step: Open

URL

Third step: Create

quick-start button