User's Manual

PS-3 – Commissioning
16
3.2 Starts after the first connection
After the first connection, access to the PocketServer WLAN is saved in your mobile
device. The devices detect each other and automatically connect from then on.
► Switch the PocketServer on.
► Wait until the WiFi symbol is shown in the status bar of the mobile device.
► Tap on the LOG PS-3 button in the start screen.
NOTE
As long as the mobile device is logged into the PocketServer's WLAN network, there is
no reception for other mobile data, meaning the device does not receive and send any
e-mails, messages or other data via the mobile network.
3.3 Selecting the language
You can change the operating language.
► Tap these buttons one after the other:
► Select your language and confirm with OK.
3.4 Setting the time zone
For correct functioning of the PocketServer, it is important that the device knows the
region and the time zone in which it is located.
► Tap the button .
► Tap Settings.
► Tap Region.
► Select your region and time zone and confirm with OK.
3.5 Entering the license key
In the basic version, the PocketServer user interface provides functions for reading
measured data. Additional functions (such as programming devices, correlation of data,
etc.) can be activated after purchasing a license. The user receives a number code, the
license key.
► In the start screen, tap the button .
► In the context menu, tap on enter license-code.
A dialogue window opens.
► Enter the license key and confirm with OK.
The new functions are now enabled. If they are not available in the user interface,
refresh the screen with the button .