User's Manual

LOG N-3
33
► In the PocketServer start screen, tap LOG N-3.
► Tap Single device.
► Select the desired logger from the Devices list.
► Tap the button .
► In the context menu, tap Export.
All data saved in the PocketServer for this logger (measured data, configuration data,
event lists, etc.) is copied to the USB stick. A success message appears at the end of
the operation.
To transfer a specific measurement record of a logger group from the PocketServer to
the USB stick, proceed as follows:
► Connect the USB stick to the USB socket of the PocketServer.
► In the PocketServer start screen, tap LOG N-3.
► Tap Patrol mode when you want to transfer the data of a Patrol group.
Tap Lift&Shift when you want to transfer the data of a Lift&Shift group.
► Select the desired group in the Groups list.
► Select the desired data record from the Data list.
► Tap the button .
► In the context menu, tap Export.
The data record is copied to the USB stick. A success message appears at the end of
the operation.
To transfer a specific measurement record of an individual logger from the PocketServer
to the USB stick, proceed as follows:
► Connect the USB stick to the USB socket of the PocketServer.
► In the PocketServer start screen, tap LOG N-3.
► Tap Single device.
► Select the desired logger from the Devices list.
► Select the desired data record from the Data list.
► Tap the button .
► In the context menu, tap Export.
The data record is copied to the USB stick. A success message appears at the end of
the operation.
To safely remove the USB stick from the PocketServer, follow these steps:
► Tap the button .
► Tap USB.
► Tap Remove USB device.
You can now remove the USB stick.
A measurement record
of a group
A measurement record
of a logger
Safely removing the
USB device