User's Manual

LOG P-3 / P-3 mini
42
 Interval
Measurement interval
 Pressure shocks
Displays whether pressure shocks are recorded (checkbox is activated) or not
(checkbox is deactivated).
 Unit
Unit of measure
 End of measurement
Displays whether an end time has been set for the measurement (checkbox is
activated) or not (checkbox is deactivated).
5.5 Reading out pressure shocks
When reading the measured data, the pressure shock recordings are not transferred.
These records must be requested by the logger separately.
► In the start screen, tap LOG P-3/LOG P-3-mini.
► Select the desired logger from the Devices list.
► Tap Pressure shocks.
The connection to the logger is established. The data is received by the PocketServer
and displayed on the screen.
In the diagram, the 60-second recording is shown as a curve.
In the field below the diagram, the date and time of the pressure shock are shown.
► Tap this field to open a list of all pressure shock recordings.
(If no list appears, no further recordings are present.)
► In the list, tap on the date of a pressure shock to open it in the diagram.
After closing the pressure shock display, you will find this data record as a new entry
under Data. It can be accessed and displayed there at any time.
5.6 Real-time measurements
You can perform a real-time measurement with the logger. The measured values are
displayed ‘live’ on the screen.
NOTE
The real-time measurement requires a great deal of energy and considerably reduces
the battery life of the logger. Only use the real-time measurement for as long as
necessary.
Measurement settings