User's Manual

LOG DX / TDM 200
72
To copy the measured data of an individual measurement from PocketServer to the
USB stick, proceed as follows:
► Select the desired device from the Devices list.
► Select the desired data record from the Data list.
► Tap the button .
► In the context menu, tap Export.
The data is transmitted. A success message appears at the end of the operation.
To safely remove the USB stick from the PocketServer, follow these steps:
► Tap the button .
► Tap USB.
► Tap Remove USB device.
You can now remove the USB stick.
7.12 Firmware update
SebaKMT provides regularly updated versions of the firmware at www.sebakmt.com for
all devices. Check and update regularly the firmware of your devices.
In order to determine which firmware version is currently installed on a device, read out
its configuration. The version is shown in the Device info section.
The following is needed:
 Computer with USB interface and internet access
 A USB stick
Proceed as follows:
► Visit www.sebakmt.com and search for the current firmware for the corresponding
device type.
► Download the firmware to the computer. If it is a packed directory with the extension
.zip, unpack it. The name of the required firmware file ends with .ldx
► Connect the USB stick to the computer.
► Copy the firmware file to the main directory of the USB stick.
► Remove the USB stick from the computer (‘Safely remove hardware’).
► Connect the USB stick to the PocketServer.
► In the PocketServer user interface, tap the button.
► Tap Update.
► Tap LOG DX / TDM 200.
A window opens with two drop-down lists.
► In the first list, select the firmware file.
Option 3: Exporting a
measurement
Safely removing the
USB device
Identifying the firmware
version
Downloading update
files
Performing an update