OWNER’S MANUAL For Household Use Only
TABLE OF CONTENTS Technical Details Important Safety Instructions Special AIRBELT D Product Features ET Power Heads Product Features Optional DISCO Floor Polisher Product Features Optional Attachments, Accessories, Bags and Filters Identification of Parts Standard Attachments Optional Attachments Assembly Operating Instructions Starting the machine with a non-power head attached Additional Instructions for starting the machine with a power head attached Suction Control Adjusting the Telescopic Tube Using th
IMPORTANT SAFETY INSTRUCTIONS ! READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE When using an electrical appliance, basic precautions must always be followed. To reduce the risk of electric shock, this vacuum cleaner has a polarized plug; one blade is wider than the other. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
SEBO AIRBELT D4 PRODUCT FEATURES The SEBO AIRBELT D4 is equipped with many extras that will make your life easier! Its “suction-optimized” airflow pathway, together with its one-of-a-kind tapered-hose technology, provides ultraquiet operation and amazing suction power. And the ergonomically designed handle offers unmatched user comfort and smooth operating maneuverability.
SEBO AIRBELT D4 PRODUCT FEATURES Liberation from Bagless! SEBO Bags are Hygienic – The three-layer filter bag is an integral part of SEBO’s filtration system because it effectively contains nearly all dirt captured by the vacuum. SEBO bags can be sealed when full, so no dust can escape into the air during disposal. In contrast, a lot of dust becomes airborne when emptying the dirt containers of bagless vacuums, and their micro filters quickly clog and must be replaced often, or a loss of suction will occur.
SEBO DISCO FLOOR POLISHER - OPTIONAL FOR THE AIRBELT D4 Polish your hard floor with a SEBO DISCO Ultra-High-Speed floor polisher! The SEBO DISCO (13” wide, 11 3⁄4” polishing width) – It’s never been easier to make hard floors shine! The SEBO DISCO floor polisher can both vacuum and polish, for a super-gloss finish. It can be attached to the FELIX uprights or to the AIRBELT canisters.
IDENTIFICATION OF PARTS 1. Handle grip 2. Power control slider 3. Handle release button 4. Slide Button 5. Telescopic tube 6. On/Off button 7. Cable rewind button 8. LED suction-power indicator 9. Tool release button 10. Kombi nozzle (optional) 11. Hose 12. Bag full or clog indicator 13. Hose neck release tabs 24 22 14. Hose neck 15. Cover release catch 16. Carrying handle 17. AIRBELT shock absorber 18. Filter bag cover 19. Suction opening 20. Parking groove 21. Power cable 22. Dusting brush 23.
OPERATING INSTRUCTIONS Starting the machine with a non-power-head attached - Figures 1, 2 & 3 6 Before turning on your canister, make sure that you have a firm hold on the handle grip to keep the machine from moving forward. 1. With the canister On/Off button (6) in the OFF position, and the power control button (2) on the handle grip (1) in the OFF (-) position, grasp the plug and pull the power cord (21) out from the power cable recess (figure 3).
Suction Control - Figure 7 The suction power will automatically increase from standby to maximum power after the machine is switched on. You can override this process by pressing the plus (+) or minus (-) on the power control button (2) conveniently located on the handle grip (1). Press the plus on the button for maximum suction or press the minus to reduce suction for vacuuming curtains or delicate fabrics.
Retracting the Cord - Figure 13 To retract the cord, switch the vacuum off, unplug it from the outlet, then press the cord rewind button (#7, figure 13) and the mechanism will automatically rewind the cord. You must hold the button down until the cord is fully rewound. Hold plug while rewinding into the cord wheel. Do not allow the plug to whip while rewinding. The rewind mechanism will stop automatically when you release the button. Before rewinding the cable, always switch off and unplug the vacuum.
VACUUM MAINTENANCE ! Always unplug vacuum from outlet before dismantling any part of machine! 18 15 Changing the Filter Bag - Figures 22, 23, 24, 25 & 26 To change the filter bag (40), switch off the power and unplug the vacuum. Lift the cover release catch (#15, figure 22) and raise the filter bag cover (18). Seal the filter bag with the sealing cap (49). Lift the filter bag out of the holder by tilting the green collar (50) up and pulling it out of the holder as shown in figure 23.
Changing the Motor Filter - Figures 28 & 29 The motor filter (42) needs to be changed when it becomes extremely dirty or clogged. To remove the motor filter, switch off the power and unplug the vacuum. Lift the cover release catch (#15, figure 28) and raise the filter bag cover (18). Pull the filter (42) out by grasping the rubber rim (#57, figure 29) of the filter and pulling it out of the groove (#56, inset, figure 29) that holds it.
CLOG REMOVAL ! Always switch off power and unplug vacuum from outlet before removing any clogs! 64 NOTE! D4 users with ET-1, ET-2 or DISCO power heads, please refer to your power head user’s manual for more detailed instructions for removing clogs in your power head. 9 63 If the “bag full or clog” warning indicator (12) remains orange after the filter bag has been changed and the filters are in good condition, there is likely a clog in the system.
TROUBLE-SHOOTING GUIDE ! Always unplug vacuum from outlet before dismantling any part of the machine! PROBLEM REASON Does not turn on 1. Telescopic tube not inserted properly. 1. See page 7. Bag full or clog light on Bag full or clog light on & machine shuts off Does not pick up Filter bag door won’t fully close 14 SOLUTION 2. Not plugged into working outlet. 2. Use another outlet. 3. Cable worn. 3. Replace cable. 4. The power control button switch is set to “-” (“off” position). 4.
AIRBELT D4 SCHEMATIC AND PARTS LIST 90640AM 90641AM Premium D4 - Black (Onyx) Premium D4 - White 90630AM Canister with Handle/Hose D4 - Red 90641AM Premium D4 - White Machine 26 45 23 25 24 47 28 27 47 53 38 44 37 47 22 39 21 20 36 19 18 47 17 47 49 50 31 47 32 51 33 52 16 46 30 15 35 13 47 29 14 12 34 11 4 (b) 47 Pos.
SEBO VACUUM CLEANER WARRANTY 1. Your authorized SEBO dealer or SEBO will provide the original product purchaser with replacement of NonWear Parts which fail due to a material or workmanship defect for a period of five (5) years from the original date of purchase of new product. SEBO will provide a five (5) year warranty on suction motors and brush drive motors. 2.