Operation Manual

41
46
44*
43
45
47* 48*
42
18
17
48*
47*
Identification of Parts
Assembly
Note
1.Handlegrip
2.On/Offswitch
3.Handleassembly
4.Retainingring
5.Coverreleaseflap
6.Dustbaghousing
7.Frontcover
8.Housingreleasebutton
9.Powerheadwithbrush
10.Cable(cord)
11.Attachmenttubehandle
12.Attachmenthose
13.Handlecatch
14.Carryinghandle
15.Cable(cord)hook
16.Attachmenttube(activewand)
17.Crevicenozzle
18.Upholsterynozzle
19.Footpedal
20.Swivelneck
21.Supportlever
22.Projectiontab
23.Connectingtube
Optional Attachments
41.Wallandfloorbrush-PartNo1325GY
42.Turbobrushforstairs-PartNo6179ER
43.Radiatorbrush-PartNo1496ER
44.Extensionhose-PartNo1495ER*
45.Straighttube-PartNo1084GY
46.Flatupholsterynozzle-PartNo1090GY
47.Dustingbrushclamp-PartNo5460GY*
48.Dustingbrush-PartNo1329GY*
*StandardwithX4Extra&X5Extra.
Otherattachmentsareavailable.
Alsoforodourcontrolthereisacombined
micro/charcoalfilter-PartNo.5425ER.
Standard Attachments
17.Crevicenozzle
18.Upholsterynozzle
Allillustrations
showninthismanual
representtheX1.1/X4
models.Wherepart
numbersand
instructionsare
differentfortheX5
modelillustrations
forbothX4andX5
willbeshown.
Placethepowerhead(9)onthefloorwith
theswivelneck(20)andthesupportlever
(21)upright.Holdthedustbaghousing(6)
verticallyandplaceitovertheswivelneck
andsupportlever.Pushfirmlyandevenly
downso that the housing release button
(8)snapsoutwardtoits„locked“position.
Slide the dusting brush clamp (47) onto
thehandletubeandtightenthescrew.The
handleofthedustingbrush(48)willnow
snapintotheclamp.
To lock the handle (3) to the dust bag
housing(6),turnthehandlecatch(13)at
thehandlejoint of the filterbaghousing
(6)forwardto„open“position.Thenslide
thehandleassembly(3)inasfaraspos-
sibleandlockitinbyturning thehandle
catchtotheclosedposition.
Pushtheblackendoftheattachmenthose
(12)intotheconnectingtube (23)so that
itclicksintoplace.Inserttheattachment
tube(16)intotheswivelneckandpushthe
handle(11)overtheprojectiontab(22).
If the machine does not work, then the
steps above have not been executed prop-
erly. Please ensure the parts are properly
pushed together and locked in place.
Attachdusting
brushclamp
withscrew.
Page6