Operation Manual

Operating Instructions
Starting The Machine
A.Beforeturningonyourvacuumcleaner,makesurethatthevacuumhandleis
initsuprightlockedpositionandthatyouhaveafirmholdonthehandlegripto
keepthemachinefrommovingforward.
1.Turnthequickreleasecablehook(15)totheuppositionbymovingit
totheleftorrightandreleasethecable.
2.Releasethecablefromtheuppercablehook(26).
3.Pluginandpresstheswitch(2)tothe„I“position.
SwitchPosition
0=OFF
I=ON
Operating Positions
B.Whenthemachineisswitchedonwiththehandleintheuprightlockedposi-
tion(seeAabove)thepowerheadandbrushautomaticallyrisefromthecar-
pet.Toreleasethemachinefromtheuprightlockedposition,pressdownon
thefootpedal(19)andlowerthehandleintothenormaloperatingposition.
Thepowerheadandbrushwillautomaticallylowertotheappropriateheight.
Asdeliveredthehandlewillgofromverticaltohorizontalinonemovement.
Howeveranintermediatestop position ispossibleinorderto liftthebrush
headoverrugedges,etc.Toopentheintermediatestopposition,movethe
orangeslider(27).Inthismodethemachinewillgoflatfromtheintermediate
positionifthefootpedalispressedasecondtime.
Boost function*
Forhighenergyefficiencyanddeepcleaningofthecarpet,theSEBOAUTO-
MATICX*isequippedwithaboostbutton(49).Pressthebutton(49)byhandto
activatetheboostfunction.Onceactivated,thebutton(42)willshinegreen.To
deactivatetheboostfunction,pressthebutton(49)again.
Pleasenotethattheboostfunctionwillbedeactivatedautomaticallywhenthe
machineisturnedoff.Afterswitchingonthemachineagain,theboostfunction
hastobeactivatedseparately.
*Dependingonmodel
WARNING! Thequality,condition,coating,texture,ageandmanufacturingtechniqueofallfloorsurfacesvary.There-
fore,uprightvacuumswithrotatingbrushes,includingyourSEBO,maydamagesomefloorcoveringsorsurfaces.Sometypes
ofhardfloordressing,cushionvinyl,woolloopcarpetsandotherdelicatecarpetsandrugsarevulnerabletodamagebyrotat-
ingbrushes.Checkwithyourflooringsupplierbeforeuseandtreatwithcare.To ensure that your new SEBD vacuum cleaner
is compatible with your floor, please test the vacuum cleaner on each type of flooring surface in a small inconspicuous area
to determine if any damage occurs. If damage occurs, stop using the vacuum cleaner immediately! It is your responsibility
to establish suitability. SEBO cannot accept liability for damage due to use on inappropriate floor coverings.
ThestandardbrushrolleronyourSEBOvacuumisappropriateformosttypesoffloorsurfaces.However,asoft-bristlebrush
roller(X1.1/X4partno.5010GEorX5partno.5290GE)isavailablethatisdesignedforuseondelicateflooringincludingloop
pilecarpet,handmaderugsandvinylsurfaces.Aswiththestandardbrushroller,youshouldtestthemachineusingthesoft-
bristlebrushrollerinaninconspicuousareapriortowidespreaduse.Thesoft-bristlerollerwillwearmorequicklythanthe
standardbrushroller,soitwillneedtobereplacedmoreoften.Also,becausethebristlesaresofter,theheightadjustmenton
themachinewillbeslightlylowerthannormalandtheredbrushlightmaycomeon.Care must be taken to ensure that the
bottom plate of the machine does not contact hard floors. Ifthishappens,damagetothefloorcouldoccur.If damage occurs,
stop using the vacuum cleaner immediately!
!
Page7