OWNER’S MANUAL For Household Use Only
TABLE OF CONTENTS Technical Details Important Safety Instructions Special AIRBELT K Product Features Optional Power Heads for the AIRBELT K3 Optional Attachments, Accessories, Bags and Filters Identification of Parts Assembly Standard Attachments Optional Attachments Operating Instructions Starting the Machine Suction Control Operating the Machine Additional Operating Instructions for K3 with Power Head Starting the Machine and Suction Control Operating the Machine Using the Telescopic Tube, Hose & Attachme
IMPORTANT SAFETY INSTRUCTIONS ! READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE When using an electrical appliance, basic precautions must always be followed. To reduce the risk of electric shock, this vacuum cleaner has a polarized plug; one blade is wider than the other. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
SEBO AIRBELT K PRODUCT FEATURES SEBO Vacuums Save Money! – SEBO vacuums are the highest quality machines available. In fact, if properly maintained, SEBO vacuums can save ordinary residential users hundreds of dollars by providing excellent performance for ten to fifteen years or more. Typical vacuums perform poorly and usually do not last beyond two years. So, in the long run, SEBO vacuums cost less money than the five to six other vacuums purchased during that time period.
SEBO AIRBELT K PRODUCT FEATURES Designed for All Floor Surfaces. AIRBELT K3: Five Power Head Choices – The AIRBELT K3 has an electrified telescopic tube designed to accommodate any choice from the following five power heads: ET-1, ET-2, ET-H and DISCO. Each power head has unique features and benefits, but all power brushes are designed to provide K3 with DISCO thorough brushing for optimal cleaning of carpets. The DISCO power head enables the vacuum to polish hard floors.
OPTIONAL POWER HEADS FOR THE AIRBELT K3 Deep clean your carpet with a SEBO power head, or polish your hard floor with a SEBO DISCO Ultra-High-Speed floor polisher! SEBO power heads and the DISCO polisher are virtually maintenance free, and their electronic overload protection feature extends belt life by automatically shutting off power, if a brush roller or polisher pad jams.
IDENTIFICATION OF PARTS 1. Handle grip 2. Power control slider (K3 only) 3. Handle release button 4. Telescopic tube 5. Slide button 6. Power cable 7. Tool release button 8. Combination nozzle 9. On/Off power control knob 10. Warning light 11. Upholstery Nozzle 12. Mains cable (K3 only) 13. Hose 14. Exhaust filter cover 15. AIRBELT shock absorber 16. Carrying handle 17. Suction opening 18. Hose release button (K3 only) 19. Hose neck 20. Crevice nozzle 21. Parking attachment holder 22.
OPERATING INSTRUCTIONS ALL K VACUUMS Starting The Machine - Figures 1, 2 & 3 22 Before turning on your canister, make sure that you have a firm hold on the handle grip to keep the machine from moving forward. 1. With the canister main power control knob (9) in the OFF position, grasp the plug and pull the power cord (6) out from the power cable recess (22). The power cord (6) should be unwound from the cable reel at least two thirds of its length. Note: do not over-extend the cord. 6 2.
ADDITIONAL OPERATING INSTRUCTIONS FOR K3 WITH POWER HEAD Please refer to your power head owner’s manual for more information Starting The Machine and Suction Control - Figures 1, 2, 8, 9, 10a & 10b Before turning on your canister, make sure that the vacuum handle is in its upright locked position (figure 8). 1.
Using the Telescopic Tube, Hose & Attachments - Figures 11 & 12 The telescopic tube (4) is useful for vacuuming corners and hard-to-reach areas. You may use the telescopic tube without a brush, power head or attachment. To remove a brush or power head, switch off the power control knob (9) and unplug the vacuum. Then, press the tool release button (7) and pull the tube out. The crevice nozzle (20) and dusting brush (28) may be inserted onto the end of the tube.
VACUUM MAINTENANCE ! Always unplug vacuum from outlet before dismantling any part of machine! 25 Changing the Filter Bag - Figure 16 45 To change the filter bag (45), set the canister upright (as shown in figure 13), press the cover release catch (25) and lower the filter bag cover (26). Grasp the green filter bag sealing plate (46), slide the plate from the holder (48) and push the filter bag cap (47) on to seal the bag.
CLOG REMOVAL ! Always unplug vacuum from outlet before removing any clogs! NOTE! K3 users with ET-H, ET-1 or ET-2 power heads, please refer to your power head user’s manual for more detailed instructions for removing clogs in your power head. 3 4 If the “bag full or clog” warning light (10) remains illuminated after the filter bag has been changed and the filters are in good condition, there is likely a clog in the system.
TROUBLE-SHOOTING GUIDE ! Always unplug vacuum from outlet before dismantling any part of the machine! PROBLEM REASON Does not turn on 1. Telescopic tube not inserted properly. 1. See page 7. Bag full or clog light on Bag full or clog light on & machine shuts off Does not pick up Filter bag door won’t fully close SOLUTION 2. Not plugged into working outlet. 2. Use another outlet. 3. Cable worn. 3. Replace cable. 4. K3: The power control slider switch is set to “0” (“off” position). 4.
AIRBELT K2 SCHEMATIC AND PARTS LIST # 9679AM # 9696AM Canister with Handle/Hose K2 - Midnight Blue K2 - Hunter Green #9696AM K2 Hunter Green Machine Pos.
AIRBELT K3 SCHEMATIC AND PARTS LIST #9681AM #9684AM #9698AM Canister with Handle/Hose K3 - Red K3 - Volcano K3 - Onyx #9681AM K3 Red Machine Pos.
SEBO VACUUM CLEANER WARRANTY Five Years Non-Wear Parts - Five Years Motor - One Year Labor 1. Your authorized SEBO dealer or SEBO will provide the original product purchaser with replacement of NonWear Parts which fail due to a material or workmanship defect for a period of five (5) years from the original date of purchase of new product. SEBO America will provide a five (5) year warranty on suction motors and brush drive motors. 2.