Operation Manual
7 8
CONTROL SWITCH
Your PAC Hearing System may be programmed with dierent settings. As you
change listening environments (for example: noise, quiet, trac, telephone,
outdoors, music) you can select the setting that allows you to hear most com-
fortably. Simply press the Control Switch located at the back of the processor
(see Figure 5) until you hear a beep(s). The audible tone(s) or beep(s) will con-
firm the setting you have selected.
Settings are programmed by your hearing care professional for your individual
needs, so it is important for you to understand how your PAC Hearing System
is programmed. See your Hearing System Record on page 18 for your custom
settings.
TURNING YOUR PAC HEARING SYSTEM ON / OFF
Your PAC Hearing System is automatically on whenever the Battery Compart-
ment Door is closed. To turn your PAC Hearing System o, simply open the Bat-
tery Compartment Door. Always leave the Battery Compartment Door open
when not in use.
NOTE: Your SeboTek hearing instrument has a programmable power on delay
setting which your hearing care professional can program for a three (3) to
twelve (12) second delay when the instrument is turned on. This delay allows
time for you to insert the device before it turns itself on.
OPERATING YOUR
PAC HEARING SYSTEM
Control Switch
(Push to Activate)
Fig. 5