Manual

Switching the weight display

The weight display can be switched between kilogrammes (kg) and pounds (lb) or

between pounds (lb) and stones (st).

– Switch on the scale using the start key.

Weight is initially displayed in the last

setting selected.

– To switch the weight display between

kilogrammes and pounds, press the

kg lb st key.

– The kg or lbs display lights up.

– To switch weight display between

pounds and stones, hold down the

kg lb st key for approx. 2 seconds.

The lbs or sts display lights up.

Automatic switch-off/economy mode

The scale automatically detects whether it is being operated on rechargeable/non-

chargeable batteries or whether it is connected to the mains.

– Operation on rechargeable/non-chargeable batteries: automatic shut-down after 20

seconds.

– With mains operation: shut-down only via keypad.

Taring weight display (TARE)

The tare function is very useful, for example for determining the weight of a child or an

object placed on the scale in addition to yourself.

Proceed as follows:

– Press the start key with no load on the

scale.

– First stand on the scales yourself with-

out the additional weight and activate

the Tare function by depressing and

holding the hold tare key.

The display is reset to zero, 0.0 flashes

in the display until weight is detected to

be stable. Only then is the Tare function

fully activated. The note “NET” appears.

– Now take the additional load onto the

scale. You can leave the scale to do so,

in which case ---- appears.

The scale determines the weight of the

additional load.

You can now perform as many weigh-

ing operations as you like.