Datasheet

SECATEC electronic GmbH
Knappenstrasse 154
D-57581 Katzwinkel
phone: [phone]
fax: [phone]
mail: [e-mail]
web: www.secatec.de
t e c h n i c a l d a t a
31.10.2013
ind. high-temp. prox. Switch
DC
3-wire
M30 x 1,5Sn 10
mm
flush
ident-no.:
55062_CO
type:
Conrad-Typ: 792844
rated operating distance Sn / mounting
assured operating distance Sa
real switching distance Sr / standard target St37
reduction factors, dependent on alloy
repeat accuracy R
differential travel H
supply voltage UB
no-load supply current Io
rated operational current Ie
voltage drop Ud
switching frequency f
operating temperature range
output
short circuit protection / at current
reverse polarity protection
dielectric test voltage ac (rms.) Ui
degree of protection acc. to DIN 60 529
on/off indication
connection
10 mm / flush
ۥ
mm 8
mm
FE360 1,0/Cu 0,2/Al 0,25/Ms 0,35/V2A 0,7
€‚
x Sr 0,02
%3...15 *
10 - 30 V DC *
€ƒ
mA5 *
max. mA150 *
€„
V at Ie =
2 * mA150 *
Hz
100
-25°C ... +70°C *
PNP-NO *
/ min. mA- - -integrated *
integrated *
temperature range of active part
norm conformity / EMC
-25°C ... +230°C
* = values of the amplifier
EN 60947-5-2
V500
IP67
LED, on the amplifier.
fixing torque
housing material
2m Teflon-cable (prox. Switch to amplifier)
2m PUR-cable (current supply) 3 x 0,75mm²
stainless steel
max. Nm30
9,0 - 11,0
max.
revision index: 000
SECATEC electronic GmbH
reserves the right to change or discontinue these products without notice
and does not assume any liability arising by use the product with non-compliance of this specifications.
Applications are inadmissible when safety of persons depends on the function of the device.