Datasheet

t e c h n i c a l d a t a
19.01.2012
reed-magnetic switch (Ex)
AC/DC
3-wire
ø13mm
ident-no.:
71424_CO
type:
Conrad-Typ: 505364
output
switching capacity
switching voltage
switching current
switch on time
switch off time
lifetime at nominal load
operating temperature range
degree of protection acc. to DIN 60 529
dielectric test voltage ac (rms.) Ui
on/off indication
housing material
connection
W/VA60
ms4,5
250 V AC/DC
max. mA1000
-20°C ... +60°C
change over
V1500
IP67
- - -
1m PVC-cable
3 x 0,75mm²
plastics
max.
ms7,0
switching frequency max. Hz100
to operations10
5
10
6
Certification (ATEX): II 2 G Ex mb II T6 / KEMA 02ATEX1288 X
Certification (IECEx): Ex mb II T6 / IECEx KEM 08.0009X
Reed switches are not suitable for direct switching of lighting, power supplies, drives, etc.
(the max current often exceeded during startup/when off).
Additional coupling with protective relays use.
revision index: 000
SECATEC electronic GmbH
reserves the right to change or discontinue these products without notice
and does not assume any liability arising by use the product with non-compliance of this specifications.
Applications are inadmissible when safety of persons depends on the function of the device.