User's Manual

ManualsBrandsSECO-LARM USA ManualsSecurity Cameras84-IR

84-IR LED Bullet Cameras

Note: Model numbers that end with “Q” or that have a round green “Q” sticker signify RoHS-compliant products.

Manual

EV-1826-NKGQ (NTSC)

EV-1826-PKGQ (PAL)



” Sony Super HAD II CCD

 2.8~12mm Varifocal lens

 Weatherproof (IP66)

 OSD functions accessible with

optional OSD controller (EV-18C)

 Optimized to produce clear

images at night

 Cables concealed in bracket

 12VDC operation

 Optional single-gang mounting plate

and round junction box available

Use to access the OSD

(On-Screen Display)

functions for

compatible cameras

without having to be

near the camera.

For more information, please see the EV-18C manual.

Zeta Series

OSD Controller

Model No.

EV-18C

Not included.

Summary of content (4 pages)

PAGE 1
EV-1826-NKGQ (NTSC) EV-1826-PKGQ (PAL) 84-IR LED Bullet Cameras Manual         1 /3 ” Sony Super HAD II CCD 2.8~12mm Varifocal lens Weatherproof (IP66) OSD functions accessible with optional OSD controller (EV-18C) Optimized to produce clear images at night Cables concealed in bracket 12VDC operation Optional single-gang mounting plate and round junction box available Zeta Series OSD Controller Model No.
PAGE 2
ENFORCER 84-IR LED Bullet Cameras Specifications: Model # Type CCD # of infrared LEDs Lens Resolution Pickup elements Sync Video output Video output format LEDs OFF Minimum illumination LEDs ON Gamma correction S/N ratio Shutter control Gain control IP rating LED range Operating voltage LEDs OFF Current draw LEDs ON Operating temperature Dimensions Weight EV-1826-NKGQ EV-1826-PKGQ IR LED Bullet Camera 1/3” Sony Super HAD II 84 2.8~12mm 600 TV lines 768x494 pixels 600 TV Lines 752x582 pixels Internal 1.
PAGE 3
ENFORCER 84-IR LED Bullet Cameras Dimensions: 45/8” (118mm) 45/16” (109mm) 101/4” (260mm) 1013/16” (275mm) 45/8” (116mm) Overview: Sunshield screw Mounting base Sunshield Camera angle adjustment screw Zoom Surface mount knock-out Mounting arm adjustment screw Remove with a pair of pliers Mounting arm Focus Adjustment screw Female BNC connector DC Plug with terminal block DC jack Adjustment nut Before Starting: 1. Please read this manual carefully and keep it for future reference. 2.
PAGE 4
ENFORCER 84-IR LED Bullet Cameras Troubleshooting: The screen is blank.     Check that the camera is powered up. Check that the power supply’s polarity is correct. Check that the monitor is powered up. Check that the video cable connecting the camera to the monitor is connected properly. The screen image is dim.  Clean the lens using a soft, clean, dry, and lint-free cloth.  Check that the light source is adequate. The screen image has poor contrast.  Adjust the monitor’s contrast knob.