User's Manual

ManualsBrandsSECO-LARM USA ManualsSecurity CamerasEV-1146-N6SQ

” Sony Color CCD

6mm lens

53° viewing angle

Up to 100’ (30m) range

Weatherproof (IP66) construction

Concealed wiring for added security

Split glass design eliminates IR

reflection.

EV-1146-N6SQ

420 TV Lines

EV-1646-N6SQ

540 TV Lines

Manual

Note: Model numbers that end with “Q” or that have a round green “Q” sticker signify RoHS-compliant products.

36 IR LED

Day/Night Bullet Camera

Summary of content (4 pages)

PAGE 1
36 IR LED Day/Night Bullet Camera Manual EV-1146-N6SQ EV-1646-N6SQ 1 /3 ” Sony Color CCD 6mm lens 53° viewing angle Up to 100’ (30m) range 420 TV Lines 540 TV Lines Weatherproof (IP66) construction Concealed wiring for added security Split glass design eliminates IR reflection. Note: Model numbers that end with “Q” or that have a round green “Q” sticker signify RoHS-compliant products.
PAGE 2
SECO-LARM 36 IR LED Day/Night Bullet Cameras Specifications: Type CCD Resolution Pickup elements Sync Video output Video output format Lens size Viewing angle Minimum illumination Gamma correction S/N ratio Shutter control Gain control IP rating # of infrared LEDs LED range Operating voltage Current draw Operating temperature Dimensions Weight EV-1146-N6SQ EV-1646-N6SQ IR bullet camera 1/3” Sony Super HAD 420 TV lines 540 TV lines 510x492 pixels 768x494 pixels Internal 1.
PAGE 3
SECO-LARM 36 IR LED Day/Night Bullet Cameras Overview: Adjustment screw Adjustment ring Adjustment screw Sunshield Adjustment screw Female BNC connector Important: Do not cut DC jack or female BNC connector as warranty will be voided. IR LEDs Mounting screw Camera base Important: Do not remove label or open case as warranty will be voided. DC jack DC plug with terminal block Before Starting: 1. Please read this manual carefully and keep it for future reference. 2.
PAGE 4
SECO-LARM 36 IR LED Day/Night Bullet Cameras Troubleshooting: The screen is blank. Check that the camera is powered up. Check that the power supply’s polarity is correct. Check that the monitor is powered up. Check that the video cable connecting the camera to the monitor is connected properly. The screen image is dim Clean the lens using a soft, clean cloth. Check that the light source is adequate. The screen image has poor contrast. Adjust the monitor’s contrast knob.