User Manual

ManualsBrandsSECO-LARM ManualsBurglar AlarmsTwin Photobeam Detector

E-964-D390Q* 390 ft. (120m) 790 ft. (240m)

E-960-D290Q 290 ft. (90m) 590 ft. (180m)

E-960-D190Q 190 ft. (60m) 390 ft. (120m)

E-960-D90Q 90 ft. (30m) 190 ft. (60m)

Manual

* Multi-frequency version

SECO-LARM

NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the

SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right to

change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.

part, without the written permission of SECO-LARM.

SECO-LARM

U.S.A., Inc. U.S.A., Inc.

U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326

Website: www.seco-larm.com

E-mail: sales

seco-larm.com

WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal

service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is

limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.

This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,

repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that

such equipment is not operating properly as a result of causes other than defects in material and workmanship.

The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at

SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or

property damages of any kind to the purchaser or anyone else.

file:DTP\Manual\MiE96x-DxxxQ_P1410.pmd

PITSW3

Also available from SECO-LARM:

Quad Photobeam

Detectors

Curtain Sensors Long-Range

Barrier Sensors

•

4 Models available - up to

660ft (200m) range

•

Weatherproof

•

12~24 VAC/VDC

•

Laser-beam alignment

Twin Photobeam Detectors

Model # Outdoor Range Indoor Range

Reflective

Photobeam Sensor

Hooded Reflective

Photobeam Sensor

Flush-Mount

Photobeam Sensors

•

2, 4, 6, 8 or 10 Beams available

•

Up to 50ft (15m) range

•

Weatherproof

•

Slimline design

•

Laser-beam alignment

•

2, 4, 6, or 8 Beams available

•

Up to 393ft (120m) range

•

Weatherproof

•

Multi-frequency

•

Adjustable interruption time

•

Available with 45ft (14m) or

35ft (11m) range

•

Weatherproof

•

Mounting hardware included

•

Reflector included

•

Available with 50ft (15m) or

33ft (10m) range

•

Weatherproof

•

Polarized version available

•

Round reflector included

•

Available with reflective beam and

16ft (5m) range or through-beam

and 33ft (10m) range

•

Adjustable alignment angle

•

Mounts to a single-gang box

Summary of content (6 pages)

PAGE 1
Also available from SECO-LARM: Quad Photobeam Detectors Curtain Sensors Long-Range Barrier Sensors Twin Photobeam Detectors Manual • 4 Models available - up to 660ft (200m) range • Weatherproof • 12~24 VAC/VDC • Laser-beam alignment Reflective Photobeam Sensor • Available with 45ft (14m) or 35ft (11m) range • Weatherproof • Mounting hardware included • Reflector included • • • • • 2, 4, 6, 8 or 10 Beams available Up to 50ft (15m) range Weatherproof Slimline design Laser-beam alignment Hooded Reflect
PAGE 2
Fig. 12: Dimensions TABLE OF CONTENTS Important ................................................... 2 Choosing a Location ................................... 3 Multiple Sensors Sample Applications ........ 7-8 Typical Installations ....................................... 4 Testing the Unit .............................................. 10 Wiring the Transmitter – Pole Mount ................ 5 Specifications ................................................ 10 Wiring ...................................
PAGE 3
Adjusting the Delay Time 1. The delay time adjustment knob sets how long the beam can be interrupted before triggering the alarm (see fig. 11): a. A short interrupt time (high sensitivity) is suitable for catching fast moving intruders, but more susceptible to false alarms. b. A long interrupt time (low sensitivity) reduces false alarms, but fast moving intruders may not trigger the sensor. 2. Adjust the knob to the site’s situation. You may need to make adjustments later after the walk-through test. Fig.
PAGE 4
Typical Installations The photoelectric beam lens can be adjusted horizontally ±90°, and vertically ±5° (see fig. 2). This allows much flexibility in terms of how the transmitter and receiver can be mounted. See fig. 3. Install at a distance of 32” to 39” (80 to 100 cm) above the ground for most situations. See fig. 3. Running the Cable Run a cable from the alarm control panel to the photobeam sensor. If burying the cable is required, make sure to use electrical conduit.
PAGE 5
Wiring the Transmitter – Pole Mount 3. Two layer (double stacked) applications. Sensor #1 Tx Ch1 Sensor #2 Rx Ch1 Tx Ch1 Rx Ch1 Sensor #4 Tx Ch3 Rx Ch2 Tx Ch2 Sensor #5 Rx Ch3 Sensor #6 Tx Ch3 Rx Ch3 Rx Ch4 Tx Ch4 4. Perimeter security application. Rx Ch2 Tx Ch1 Sens or # Sen Rx Ch3 sor Tx Ch3 3 Sen #1 Sens sor Tx Ch4 1. Remove the cover. Remove the screw under the lens unit in order to detach the mounting plate. See fig. 4. Wiring (fig. 8) 2.
PAGE 6
Fig. 9: Examples of Possible Ways To Connect One or More Sensors Control panel (12VDC) Example connection 1 - Standard }Power }Alarm signal Table 2: Beam Frequency Selection Chart (For E-964-D390Q model only) Example connection 2 - Dual Sensors, Separate Channels Control panel (12VDC) }Power Frequency channel Switch position CH1 CH2 CH3 CH4 1 2 1 2 1 2 1 2 NO Receiver NO Transmitter Important – The transmitter and receiver sensor pair must be set with the same frequency.