Data Sheet

Copyright 2013 © SECO-LARM U.S.A, Inc. All rights reserved.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
PiEAP-5D1Q.docx
16842 Millikan Ave, Irvine, CA 92606
Tel: [phone] • Fax: [phone]
[e-mail] • www.seco-larm.com
Access Control Power Supply
EAP-5D1Q
1 Output, 5A@12VDC, 2.5A@24VDC
EAP-5D1MQ
PC Board only from EAP-5D1Q
Features:
• AC Power failure supervision relay
• Battery failure supervision relay
• Selectable 2.2K-Ohm End-of-Line (EOL) resistor for AC
failure and battery failure supervision relays
• Selectable delay timer (5sec, 5min, 5 hours) for AC
failure supervision relay
• LED Overload indicator and automatic shutdown for
short-circuit protection
• Fuse-protected AC input
• Built-in back-up battery charger
• Automatically switch to back-up battery if AC fails
• Individual AC input and DC output LED status indicators
Power:
•
Field selectable for 12VDC or 24VDC output
• Operating input voltage 110~240 VAC
• Adjustable voltage range (11~15 VDC, 23~26 VDC)
to compensate for voltage drop
• Supply current: 5A@12VDC, 2.5A@24VDC
• AC Input fuse rating 3.15 Amps (glass fuse)
• DC Output overload sensing with red LED indicator
and automatic shutdown during short circuit
Enclosure:
• Heavy-duty steel case to protect the power
connections
• Removable steel cover for easy access
• Ventilation holes to prevent heat build-up
• Enclosure has enough room for two 7AH batteries
• 6ft Power cord and battery leads included
• Dimensions: 12
3
/
16
” x 12
7
/
16
” x 3
9
/
16
”
• Knock-out on the cover for optional cam lock
Dimensions: 12
3
/
16
” x 12
7
/
16
” x 3
9
/
16
”
Connection Diagram:
AC Failure supervision
relay output to audio/
visual warning device
DC Output
terminal block
Back-up battery
terminal
DC Output LED
status indicator
Battery presence and
low battery monitor
DIP switch
End-of-Line (EOL)
2.2K Ohm resistor DIP
switch
AC Failure delay timer
DIP switch
VR1 Rotary knob for
DC output voltage
range adjustment
DIP Switch for 12 or
24 VDC output
110~240 VAC input
Battery failure and low
battery supervision
relay output to
audio/visual warning
Power supply
Power supply
SL-126Q