User Manual

ManualsBrandsSECO-LARM ManualsAudio & Video UTPBasic Passive Video Balun

Note: Products with model numbers that end with “Q” or that have a round green “Q” sticker are RoHS compliant.

Installation Manual

Passive Video Baluns

 Transmits up to 1,300ft (400m)

color video or up to 1,950ft (600m)

B/W video

 Passive operation – No external

power required

 High immunity from interference

EB-P101-01Q

Passive Video Balun

EB-P101-20Q

Passive Video Balun with 6” Pigtail

 Uses low-cost Cat5e/6 cable

instead of costly coaxial cable

 Screwless terminal blocks for

easy installation

 Small size allows mounting of

multiple baluns behind a DVR

Summary of content (4 pages)

PAGE 1
Passive Video Baluns Installation Manual EB-P101-01Q Passive Video Balun EB-P101-20Q Passive Video Balun with 6” Pigtail  Transmits up to 1,300ft (400m) color video or up to 1,950ft (600m) B/W video  Passive operation – No external power required  High immunity from interference  Uses low-cost Cat5e/6 cable instead of costly coaxial cable  Screwless terminal blocks for easy installation  Small size allows mounting of multiple baluns behind a DVR Note: Products with model numbers that end with “Q”
PAGE 2
ENFORCER Passive Video Baluns Specifications: Model EB-P101-01Q Video Connections Other EB-P101-20Q 1,950’ (600m) 1,300’ (400m) NTSC, PAL, SECAM 1.1Vp-p <2dB per pair from DC~6MHz >15dB from DC~6MHz DC~6MHz >40dB, 15kHz~6MHz UTP (Unshielded Twisted Pair) 24~16 AWG Cat2~Cat6 Silver plated DC~6MHz, 6.6dB max. 75Ω@1MHz 100Ω@1MHz 52Ω/1000’ (52Ω/305m) 19pF/ft max. (62pF/m max.) No power required 32 ~131 F (0 ~55 C) -4 ~158 F (-20 ~70 C) 0~95 % (Non-condensing) ABS Plastic 1.
PAGE 3
ENFORCER Passive Video Baluns Installation: 1. Video baluns are connected in pairs. Connect one balun to the CCTV camera. Connect another balun to a DVR or other remote device. 2. Make sure the distance between the camera and the remote video device does not exceed 1,950ft (600m) for black and white video or 1,300ft (400m) for color video. 3. Run Cat5e/6 cable (UTP) from the remote video device to the camera. 4. Connect the Cat5e/6 cable to both baluns. NOTE: Video baluns are polarity-sensitive. a.
PAGE 4
ENFORCER Passive Video Baluns Also Available from SECO-LARM: 4-Channel Passive Video Transceiver 16-Channel Passive Video Transceiver Active Video Baluns (Single or Hub) Weatherproof Passive Video Balun Passive Video, Power, and Data Balun Passive Video Balun with Ground Loop Isolator Troubleshooting: Wavy or ghost image if connected to image processor (e.g., multiplexer or DVR), but not if directly to monitor.  Move the Cat5e/6 cable away from possible sources of interference.