Manual

ManualsBrandsSECO-LARM ManualsSecurity Cameras2 Megapixel IP Wall-Plate Camera, 2.5mm Lens

™

EV-N5205-3S4Q

IP Wall-Plate Camera

Manual

Features:



2.8

" 2MP Sony STARVIS™ CMOS

 H.265, H.264/MJPEG, Tri-stream IP

Camera

 Max. 30FPS/Full HD 2MP (1920x1080)

 Remote access via web browser

 Network Bandwidth Control

 Event Alarm, E-mail, FTP Function

 ONVIF Profile S

 Vandal-resistant metal front panel

 3DNR & D-WDR

 12VDC, PoE (IEEE 802.3af)

 IP65 Weather-resistant*

*Use silicone sealant for weather-resistant installation (see pg. 3)

Summary of content (4 pages)

PAGE 1
EV-N5205-3S4Q IP Wall-Plate Camera Manual Features:  1/2.8" 2MP Sony STARVIS™ CMOS  H.265, H.264/MJPEG, Tri-stream IP Camera  Max. 30FPS/Full HD 2MP (1920x1080)  Remote access via web browser  Network Bandwidth Control       *Use silicone sealant for weather-resistant installation (see pg. 3) ™ Event Alarm, E-mail, FTP Function ONVIF Profile S Vandal-resistant metal front panel 3DNR & D-WDR 12VDC, PoE (IEEE 802.
PAGE 2
ENFORCER IP Wall-Plate Camera Specifications: Type Sensor Video encoding Resolution DNR Wall-plate Camera 2MP Sony STARVIS™ CMOS H.265, H.264, MJPEG 2MP, (1920x1080) Yes Yes Yes 2.5mm 120° 0.01 Lux 2.0 0.45 50dB Auto Auto 12VDC, PoE (IEEE 802.3af) 140mA max. 32°~122° F (0°~50° C) 23/4"x41/2"x31/16" (70x114x78 mm) 3.8-oz (110g) 1/2.
PAGE 3
ENFORCER IP Wall-Plate Camera Overview: NOTE: For weather-resistant installation, apply a bead of silicone sealant (not included) around the rim of the back box and faceplate edge and ensure that the back box openings are sealed. Apply a small amount of sealant below each screw head. DC Plug Camera RJ45 Jack Single-gang Plate Single-gang back box IMPORTANT: Do not cut DC Plug or RJ45 jack as warranty will be voided. Before Starting: 1. Please read this manual carefully and keep it for future reference. 2.
PAGE 4
ENFORCER IP Wall-Plate Camera Troubleshooting: The screen is blank The screen image is dim The screen image has poor contrast The screen image flickers The camera case is hot               Check that the camera is powered up Check that the power supply's polarity is correct Check that the monitor is powered up Check that the video cable connecting the camera to the monitor is connected properly Verify video format Clean the lens using a soft, clean cloth Change the position of the camera