Spec Sheet

®
Superior Electronics Corporation
No.10, Lane 31, Chungteh St., Taipei 110, Taiwan
Tel: 886-2-2378-6161
Fax: 886-2-2378-6163
E-mail: info@superior-elec.com
Website: www.enforcer.com.tw
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
The quick, low-cost, long-distance way to connect a
CCTV camera to a monitor, multiplexer, or video recorder.
(Transmitter & Receiver
are same size.)
Specifications for Transmitter & Receiver:
Video format: RS170, NTSC, PAL, SECAM, CCIR
Video input: 1Vp-p, 75 ohms, BNC connector
Data: In, out, 4-ports
Cable type: CAT 2 or better (best is CAT 5e)
Blue LED: Power on/off
Adjustments: Tx - 3 positions
Rx - 5 dip switches (32 combinations)
Insertion loss: < 2dB per pair from DC ~ 5Hz
Return loss: >15dB from DC ~ 5MHz
Frequency response: DC ~ 5MHz
Attenuation: DC ~ 5Hz, 1.5dB max.
Common mode
rejection:
60dB
Multiplexor or DVR
The active (amplified) video balun transmits video signals of a
CCTV camera long distances over low-cost CAT 5e cable.
Suitable for full-motion color and monochrome cameras,
video
signal and gain are adjustable for maximum picture quality. A
built-in data port allows the transmission of PTZ signals.
Note: For distances under 1,000 feet (300m), we
recommend
using the EVT-PB1 passive video balun.
Receiver
Shown
Power: 12/24 VDC
12VDC adapter included
Power consumption: 40mA Tx, 60mA Rx @ 12VDC
Surge protection (video): Surge ratings IPP, 100 Amp at
10us x 1000us, Maximum Peak
Current, 250 Amp at 8us x
20us, Transient Voltage Surge
Suppressors
Temperature range: 7°~329° F (-14°~165° C)
Humidity range: 0~95%
Impedance: (BNC): 75, (terminal): 100
Case: ABS plastic
Weight: Tx 3.4 oz. (95g), Rx 3.0 oz. (84g)
CAT 5e
Features:
Active operation – The transmitter amplifies the video
signal for excellent picture quality at long distances.
Transmits video signal up to 1.5 miles (2.4km).
Uses low-cost CAT 5e unshielded twisted pair cable
instead of costly coaxial cables.
Includes BNC connectors and removable terminal blocks –
No need to waste time crimping RJ-45 connectors.
Typical Installations:
Dimensions:
For cleaner & more
professional installs
Interlocking Design
High immunity from interference – Built-in
impedance coupled device and noise filter.
Easy installation. Removable terminal blocks.
300mA DC output on active transmitter.
Includes 12VDC power adapters.
Gold-plated BNC connectors.
Surge protection. Ground lifting
and transient protection.
2.3” (59mm)
1.7” (43mm)
1.6”
(41mm)
VIDEO
ENFORCER
Range: Up to 1.5 miles (2.4km)
Active Video Balun
Video Data Surge Protection
EVT-TB1-42T Transmitter
EVT-RB1-4T2 Receiver
EVT-AB1 Tx & Rx Set
PI_ActiveBlun.pmd_059
Monitor
Interlocking Design For cleaner &
more professional installs
When using multiple
baluns, only a jumper
(included) is needed
to extend power &
data (max of 8 per
power adapter).
C
Pigtail
EVA-F55213
DC Output
300mA max
12/24 VDC
12/24 VDC
Up to 1.5 miles (2.4 km)
EVT-RB1-4T2
Receiver
EVT-TB1-42T
Transmitter
C
C

Summary of content (1 pages)