Manual

ManualsBrandsSECO-LARM ManualsConvertersHDMI to Composite Converter

MVA-HT01Q

HDMI-to-Composite Converter

Manual

• Converts HDMI to composite video + stereo audio

• Supports input resolutions up to 1920x1080

• Supports NTSC or PAL output

• Stereo analog audio output

• Plug and play operation

Up to

1920x1080

Resolution

Summary of content (4 pages)

PAGE 1
MVA-HT01Q HDMI-to-Composite Converter Manual Up to 1920x1080 Resolution • Converts HDMI to composite video + stereo audio • Supports input resolutions up to 1920x1080 • Supports NTSC or PAL output • Stereo analog audio output • Plug and play operation
PAGE 2
ENFORCER HDMI-to-Composite Converter Introduction: The MVA-HT01Q HDMI-to-Composite Converter allows the user to view video from HDMI devices on analog TVs or projectors without HDMI inputs. Active operation allows the conversion of formats as large as 1920x1080. The MVA-HT01Q also has a L/R analog stereo output allowing the conversion of audio as well.
PAGE 3
Overview: Input ENFORCER HDMI-to-Composite Converter Top Output Side Installation: 1. 2. 3. 4. 5. 6. Decide where the converter will be installed. Connect the HDMI cable from the HDMI device to the input of the converter. Connect the composite RCA cable from the monitor to the analog output of the converter. Connect the speakers’ stereo audio cables to the audio output of the converter. Using the included USB cable, connect power from a powered USB port on the HDMI device.
PAGE 4
ENFORCER HDMI-to-Composite Converter Troubleshooting: HDMI device does not function correctly. • Make sure the converter is powered. • Make sure the input and output devices are powered. • Test the cables separately to make sure they are functioning. • Make sure that you are trying to convert HDMI to composite video. The MVA-HT010Q does not convert composite video to HDMI.