Manual

ManualsBrandsSECO-LARM ManualsAccess Control Power productsSwitching CCTV Power Supply, 18 Outputs, 20 Amps, PTC Fuses

12VDC Switching CCTV Power Supply

Manual

1820

PULQ shown

Model

Number

Number of

Outputs

Total Supply

Current

Max. Current

per Output

PC-U0405-PULQ 4 5A 1.6A

PC-U0910-PULQ 9 10A 1.6A

PC-U1810-PULQ 18 10A 1.1A

PC-U1820-PULQ 18 20A 1.6A

PC-U1830-PULQ* 18 30A 1.85A

*Special order item. Please contact SECO-LARM for details.

Summary of content (4 pages)

PAGE 1
2VDC Switching CCTV Power Supply Manual PC-U1820-PULQ shown Model Number Number of Outputs Total Supply Current Max. Current per Output PC-U0405-PULQ 4 5A 1.6A PC-U0910-PULQ 9 10A 1.6A PC-U1810-PULQ 18 10A 1.1A PC-U1820-PULQ 18 20A 1.6A PC-U1830-PULQ* 18 30A 1.85A *Special order item. Please contact SECO-LARM for details.
PAGE 2
ENFORCER 12VDC Switching CCTV Power Supply Features: • • • • 100~220 VAC Input* New lightweight, cost-effective design Improved efficiency Adjustable output to reduce voltage drop • • • • Outputs protected with PTC fuses Individual output status LEDs Heavy-duty steel case with cover Built-in short circuit and overheat protection Parts List: 1x Power supply 2x Keys 1x Power cord 1x Manual 2x Rubber rings Specifications: Model PC-U0405-PULQ PC-U0910-PULQ PC-U1810-PULQ PC-U1820-PULQ PC-U1830-PULQ Outpu
PAGE 3
ENFORCER 12VDC Switching CCTV Power Supply Installation: 1. Find a suitable location to install the power supply. The power supply should be installed out of sight, and in a place protected from weather and high humidity. The power supply must have adequate ventilation. Insufficient ventilation may cause overheating and damage could result. 2. Remove one of more of the cable knock-outs, depending on how many connections will be made. Knock-outs are shown in Fig. 1 to the right.
PAGE 4
ENFORCER 12VDC Switching CCTV Power Supply Installation Notes: • • • • ALWAYS TEST OUTPUT VOLTAGE BEFORE CONNECTING DEVICES. Indoor use only. Do not mount the unit where it may be exposed to weather or high humidity. For professional installation only. Installation must conform to all local laws and building codes. Input Voltage Note (for PC-U1820-PULQ & PC-U1830-PULQ only): For 220VAC input voltage, locate the input voltage switch on the bottom of the enclosure.