Specifications

ENFORCER
®
2009 Condensed Mini Catalog
10
SD-995C
Use with optional digital keypad such as
SECO-LARM’s SK-1011-SQ or SK-1131-SQ
for keyless high security.
ANSI-sized — 4
7
/
8
" x 1
1
/
4
" x 1
1
/
4
"
Reversible for right-hand or left-hand doors.
Jaw strength — 2,000 lbs.
Stainless-steel lip (keeper) for strength and long life.
Non-polarized connection.
Shallow design for use with most doors.
Powered by a solenoid.
Tested to 1 million cycles.
Current draw — 250mA @ 12VDC.
SD-995C24
Same as SD-995C, but 24VDC.
Current draw — 150mA @ 24VDC.
SK-990AQ Fail-secure ---
Power-off locking. Power unlocking.
For entrance doors.
SK-990BQ Fail-safe --- Power locking.
Power-off unlocking.
For use in metal doors.
Field-programmable in seconds
for fail-secure or fail-safe.
SD-994C
Similar to SD-995C, but
for use in wood doors.
Use with optional digital keypad such
as SECO-LARM’s SK-1011-SQ or
SK-1131-SQ for keyless high security.
ANSI-sized — 7
15
/
16
" x 1
7
/
16
" x 1
3
/
8
".
Reversible for right-hand
or left-hand doors.
Jaw strength — 2,000 lbs.
Stainless-steel lip (keeper)
for strength and long life.
Non-polarized connection.
Current draw — 250mA @ 12VDC.
SK-990AQ
SK-990BQ
For use in wood doors.
Connect to optional keypads including
SECO-LARM’s SK-1011-SQ or SK-1131-SQ.
Baked painted finish.
SD-994C24
Same as SD-994C, but 24VDC.
Current draw — 150mA @ 24VDC.
Fail-secure
operation
Fail-safe
operation
For concealed mounting.
5
/
8
” (17mm) bolt extension.
Fail-safe operation.
12VDC input.
Narrow design,
(7
7
/
8
" x 1
5
/
16
", 200 x 32 mm).
Door position monitoring output (N.O./COM/N.C.).
Similar to SD-997BQ,
but fail-secure
(locks when power
disconnected).
Incorporates manual
lock/unlock cylinder
to operate the
SD-997AQ if power is lost.
SD-997BQ
SD-997SMBQ
SD-997AQ
Surface-mount
bracket set for SD-997BQ.
keylock
lock knob
SD-993B-SS
1,500-lb
Shear Lock
SD-993S-UB
U-Bracket
U-bracket for mounting
on most glass doors.
SD-993S-SB
Surface mount bracket
Holding force —
1,500 lb. (680kgs).
Small size for use with most metal door jambs.
Works with sliding, single-action and
double-action (swing-through) doors and gates.
Fail-safe operation.
12 or 24 VDC.
For surface mounting of
shear lock (when recessed
mounting is not possible).
Surface-type door closer.
No-handed operation
(reversible).
Separate adjustment of
both closing and latch
speeds.
Aluminum and
steel construction.
For metal or wood doors.
Designed to conduct power to
electric locks or access
control devices mounted in doors.
18” Stainless-steel cable.
Mounting screws included.
SD-969-S18
SD-969-A18
SD-969-S18
SD-969-A18
SD-969-S18
--- Die-cast aluminum end caps.
SD-969-A18
--- Plastic end caps.
For exit doors -- Allows exit from
inside while locked from outside.
Reversible non-handed design.
For metal or wood doors.
Stainless-steel 3/4" throw latch bolt.
Deadlocking latch.
Can be unlocked for extended periods of time.
Fits doors from 30" to 48" wide.
Heavy-duty steel construction.
Pushing the bar sends a signal to release a
lock, sound an alarm, activate a camera, etc.
Rugged, heavy-duty construction.
For 36-inch doors (actual length is 34.5 inches).
Includes 2 built-in dual-contact switches
(5A @ 125VAC).
Includes SECO-LARM SD-969-A18 Armored Door Cord.
SD-961A-36
Redesigned
_
Easier to install.
SD-C141S
SD-962AR-36A
Electric Shear Lock
Electric Door Strikes
Electric Deadbolts
Rim-Type Exit Device
Push-to-Exit Bar
Door Closer
Armored Door Cords