Specifications

2009 Condensed Mini Catalog2009 Condensed Mini Catalog
2009 Condensed Mini Catalog
ENFORCER
®
16
SS-038-2CSBO
Shadow/eyeball switch.
SS-090KN
Extra keys. Specify number.
SS-090
2 terminals, shunt SPST.
Maintained ON-OFF, key removable
from both ON and OFF positions.
Specify key number when ordering.
SS-095
2 terminals, momentary SPST.
Maintained OFF, springs back from
ON, key removable from OFF only.
Specify key number when ordering.
SS-090-1
Similar to SS-090, but key removable
in OFF position only.
SS-092-2
Two internal SPST
switches, one always
ON, one always OFF.
SS-078Q
N.O. latching panic button.
SS-077Q
N.C. latching panic button.
SS-076Q
Toggle switch.
Available in gray or white.
SS-074
N.O. double-button
momentary hold-up switch.
SS-075Q
N.O. “EMERGENCY” button.
SS-072Q
N.O. tamper switch.
SS-073Q
N.C. tamper switch.
SS-040Q
N.C. vibration/shock sensor.
Adjustable sensitivity.
SS-075C-PE
Emergency & Push-To-Exit
N.O. or N.C. (selectable)
momentary contact.
3 labels included.
ENFORCER 190
Audio Discriminator.
Patented design detects
high-frequency sound of
glass breaking while
filtering out ambient
environmental noise.
When ceiling mounted, protects to a 25 ft. radius.
Protects 45 ft. to the front and 25 ft to either side.
Easy 2-wire connection
for 5V to 14VDC
or 9V to 28VDC.
SL-126
For 5- to 14-Volt use.
SL-126-A24
For 9- to 28-Volt use.
Easy 2-wire installation.
Perfect for "informative" household burglar alarm use.
Incorrect polarity cannot damage circuit or draw current.
Low current consumption with long operating lifespan
of over 300 continuous hours (2,000,000 flashes).
Choice of amber, blue, clear, or red lens.
Lens is made of high-impact resistant acrylic, case
of high-impact resistant ABS plastic.
SL-126L -- Extra lens for SL-126 and SL-126-A24.
Choose amber, blue, clear, or red.
(SL-126)
SH-504Q
Miniature 85dB electronic buzzer.
5-15VDC, surface mount or mount
in
3
/
4
" (19mm) hole of alarm panel
or remote plate.
Low current drain of 35mA @ 12VDC.
SH-532L
3-tones.
128dB multi-tone.
Miniature size, 4” long, 3½” diameter.
6-12VDC, 1.4A current drain.
SH-515
Warble Tone Siren
Weather-resistant black
ABS trumpet
5” Dia. (127 mm)
6-12VDC, 500mA at 12VDC
For entrance monitoring
or entrance indicator.
“Ding-dong” or siren
sound on beam
interruption.
E-931CS22RRCQ (22' range)
Plug-in components.
No hard wiring needed.
Includes reflector,
brackets, 9VDC adapter,
mounting hardware, chime.
Optional counter also available.
E-931ACC-CQ
Counter for the
E-931CS22RRCQ.
E-931ACC-SQ
Additional Speaker/Chime
for the E-931CS22RRCQ.
X-L421-B2W2
Compact light (size 6"L x 1"D).
2 AA-cell batteries,
nylon belt pouch.
Grounded plug to grounded jack.
6” cord.
Angled grounded plug to grounded jack.
6” cord.
Grounded plug to 2 grounded jacks.
6” cord from the
splitter junction.
Grounded plug to IEC320-C13 plug.
6” cord.
CA-1K1B-1FQ
CA-1L1A-1FQ
CA-1K2A-1FQ
CA-1K1A-1FQ
X-L461-B2W2
Magnetic flex light.
18" flexible shaft with
heavy-duty magnet.
Includes spare bulb
and 2 AA-cell batteries.
YELLOW AND RED LEDs MAKE THE DIFFERENCE
SECO-LARM’s patented yellow turbulence LED reduces
false alarms by offering easy pinpoint sensitivity
adjustments without external test meters. The yellow LED
flashes to indicate that the ambient environmental noise
is too high, and may cause false alarms. This allows the
installer to instantly change the sensitivity to fit the noise
level at virtually any site. The red LED indicates an alarm
condition. With the two LEDs, setting sensitivity is both
simple and accurate.
SS-032/RD
Red N.O. pushbutton.
SS-033/BK
Black N.C. pushbutton.
Stainless steel slimline plate
with 3/4” D-hole.
SS-199
Same as SS-199, but single-
gang with Red, Green LEDs.
SS-229
Same as SS-199, but single-gang.
SS-299
Detectors and Switches
Key Locks
Glass Break Detector
Buzzer
Strobe Lights
Sirens
Entry Alert System
Flashlights
AC Pigtails
Remote Plates