Specifications

www.seco-larm.com
7
VG-1C12AQ
Gold-plated BNC connector.
Passive operation -- No external power required.
High immunity from interference -- Built-in
impedance coupled device and noise filter.
BNC terminals for easy installation.
EVT-PB1Q
EVT-PBP-V1TQ
EVT-PB1-V1TSQ
EVT-PB1-V1TGQ
Patent
pending
Surge protection.
Gold-plated BNC connector.
Screw terminals for
reliable installation.
Transmit range:
2,000 ft. B/W,
1,300 ft. color.
Gold-plated BNC connector.
Built-in ground loop isolation.
Removable terminal block.
Surge protection.
Transmits B/W signal up to 980 ft.
EVT-PBM-V27Q
EVT-TB1-42TQ
EVT-PBM-V17Q
Active Video Balun Receiver
Active Video Balun Set
Includes EVT-TB1-42TQ transmitter
and EVT-RB1-4T2Q receiver.
EVT-AB1Q
Up to 1.5 miles with active
transmitter. Video, data, and
surge protection. Interlockable.
EVT-RB1-4T2Q
Up to 1.5 miles with active
receiver. Video, data, and
surge protection. Interlockable.
Female gold-plated BNC, fits a
9
/
16
" x
5
/
8
" hole in a single-gang plate.
Transmit range: Up to 2,000’ (610m).
RJ-45 connection.
Male gold-plated BNC, fits a
9
/
16
" x
5
/
8
" hole in a single-gang plate.
Transmit range: Up to 2,000’ (610m).
RJ-45 connection.
Active Video Balun Transmitter
EVA-RS1
RS-232 to RS-485 converter
Connects up to 32 devices.
Up to 3,900 ft.
EVT-PH4-V2WOQ
RD-304-D1Q
The ENFORCER RD-304-D1Q RS-485 Data
Distributor transmits a single RS-485 or
RS-232 input to four (4) RS-485 outputs.
Range: Up to 4,000’ (1,200m).
Connect up to 64 RS-485
cameras or devices.
Output: Four (4) RS-485.
12VDC power adapter (included).
Built-in surge protection and signal isolation.
Dual colored LED:
Red - RS-485 activity, Blue - Power ON.
RD-316-R1Q - 16-Port Data Distributor
The ENFORCER RD-316-R1Q RS-485 Data
Distributor transmits a single RS-485 or RS-232
input to 16 RS-485 outputs. Can be used with any
RS-485 controlled camera, and can control up to
256 RS-485 controlled cameras by using multiple
units in a daisy-chain (home-run) conguration.
Range: Up to 4,000’ (1,200m).
Connect up to 256 RS-485 cameras or devices.
Output: Sixteen (16) RS-485.
12VDC power adapter (included).
Built-in surge protection
& signal isolation.
Dual colored LED:
Red - RS-485 activity, Blue - Power ON.
Rack or wall mountable.
Gold-plated BNC connector.
Screwless terminal block for
easy installation.
Transmit range:
2,000 ft. B/W,
1,300 ft. color.
6-inch BNC pigtail connector.
Gold-plated BNC connector.
Screw terminals for
reliable installation.
Transmit range:
2,000 feet B/W,
1,300 ft. color.
EVT-PH16-4T2Q - 16-Port Passive Balun Hub
The EVT-PH16-4T2Q allows up to 16 CCTV
cameras to be connected via inexpensive CAT5e/6
UTP cable.
Connects up to 16 CCTV cameras using low-cost
CAT5e/6 UTP cable to a central location.
Works in conjunction with passive video or active
video baluns.
Compact enclosure, only 1U (1.75 inches) high.
Mounts in a standard 19-inch rack, or stacks on a
shelf or table.
Built-in transient protection and interference
technology for existing UTP cables.
Gold-plated BNC connectors.
Complete passive operation, no power required.
EVT-AH16-4T2Q - 16-Port Active Balun Hub
Rack-Mount or stackable.
Video In: 16 (terminal block).
Video Out: 16 (BNC connector).
Power input DC12V.
Power consumption: 500mA.
Built in video, data surge protection.
Perfect to work with DVR.
Active IP baluns
over coax or UTP
cable available.
Please see page
17 for more
information.
Connects up to 4 CCTV
cameras to a central
location using low-cost
Cat5e/6 UTP cable.
Works with full-motion
CCTV cameras up to 2,000 feet
(610 meters) away via passive video baluns.
RJ-45 or terminal block.
Passive Video Baluns
4-Port Passive Video Hub
Active IP Baluns
RS-232 to RS-485 Converter
Snap-In Passive Video Baluns
Active Video Baluns
4-Port Data Distributor
Rack-Mount Data Distributor
Rack-Mount Passive Balun Hub
Rack-Mount Active Balun Hub
Ground Loop Isolator