Data Sheet

SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Copyright 2015 © SECO-LARM U.S.A., Inc. All rights reserved.
All trademarks are the property of SECO-LARM U.S.A., Inc. o
r their respective owners.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the
right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Phone: [phone] | [phone] Fax: [phone]
Website: www.seco-larm.com Email: [e-mail]
PI_SK-910RAV2Q_150811.docx
Miniature 2-Channel RF Receiver & Transmitters
SK-910RAV2Q 2-Channel Receiver – Transistor Group O/P
•
Four programmable output modes:
- 4-Second Momentary Output -- Validity Output
- Toggle Output -- 1-Second Momentary Output
•
Flexible operating voltage: 3~13.8 VDC.
•
Up to 500ft (152m) range*.
•
Controls garage doors, gates, house lights, alarm panels, or other devices via
remote.
•
Compatible with all 315MHz SECO-LARM transmitters (fixed code and
CODEBUMP).
•
Two LEDs indicate RF reception, learn mode entered, transmitter learned, memory
cleared, and relay output mode.
SK
-919TD2A-UP Factory Pre-Coded Transmitter
SK
-917T2A-U CODEBUMP Transmitter
•
Operates up to 500ft (152m), 315MHz*.
•
LED transmission indicator.
•
Includes 12VDC alkaline battery.
•
Two buttons, three channels.
•
SK-919TD2A-UP: Over 68 billion possible codes.
•
SK-917T2A-U: 18 quintillion possible codes.
SK
-919TP2H-NU Two-Button Handheld Transmitter
•
Operates up to 500ft (152m), 315MHz*.
•
Over 68 billion (6.8x1010) possible codes.
•
Includes two 3VDC lithium batteries.
•
Visor clip and belt clip included. Belt-clip holster & wall-mount
bracket also available (Model: SK-9HBC).
•
Two buttons, three channels.
•
Slimline design.
*
Actual range may vary greatly depending on the installation and operating
environment.
SK-910RAV2Q Specifications:
Range
Up to 500’ (150m) in open air
Operating voltage 3~13.8 VDC
Current Draw
5mA Standby, 15mA
LED flashing @ 12 VDC
Output Mode
Programmable 4s momentary (default),
1s momentary, toggle (ON/OFF), validity
# of outputs
2
Output Type
3A Transistor GND
Transmitter Compatible with all SECO-LARM transmitters
3
3/16
”x 2
9/16
”x
3/4
”
(80x65x19 mm)
1
1/4
”x 2
1/4
”x1
1/2
”
(32x63x38 mm)
2
13/16
”x 3
1/2
”x
1/2
”
(71x89x13 mm)