Spec Sheet

SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA, 92606
Copyright © 2017 SECO-LARM U.S.A., Inc. Todos los derechos reservados. Todas las marcas son propiedad de
SECO-LARM U.S.A., Inc. o de sus respectivos propietarios. La política de SECO-LARM es de desarrollo continuo; por tal razón, SECO-LARM
reserva el derecho de cambiar los precios y las especificaciones sin previo aviso. SECO-LARM no se responsabiliza por errores de impresión.
Phone: [phone] | [phone] Fax: [phone]
Website: www.seco-larm.com Email: [e-mail]
PiSK-910RB2Q170303b.docx
2-Channel RF Transmitters and Receiver, 315MHz
SK-919TD2A-UPQ 2-Button Pre-Coded Transmitter
SK-917T2A-UQ 2-Button CODEBUMP™ Transmitter
• Range: Up to 500ft (152m)*, 315MHz
• LED Transmission indicator
• Includes 12VDC alkaline battery
• Compatible with all 315MHz SECO-LARM receivers
• SK-919TD2A-UPQ: 68 billion possible codes
• SK-917T2A-UQ: 18 quintillion possible codes
SK-910RB2Q Specifications:
Operating frequency
315MHz
Memory capacity
15 Transmitter button codes per
channel, 30 total
Operating voltage
11~24 VAC/VDC
Operating
current
Standby
8mA@12VDC
Active
30mA@12VDC
Relay output modes
4-Sec momentary, 1-sec momentary,
toggle, latch, validity
Relay contact rating
Form C 10A@24VDC/120VAC
Connectors
Screw terminals: Power (+,-)
1 relay per channel (NO/NC/COM)
Dimensions
3
7
/
16
”x3
7
/
16
”x1
1
/
8
” (87x87x28 mm)
SK-919TP2H-NUQ 2-Button Handheld Transmitter
• Range: Up to 500ft (152m)*, 315MHz
• Over 68 billion possible codes
• Includes two 3VDC lithium batteries
• Compatible with all 315MHz SECO-LARM receivers
• Visor clip and belt clip included. Belt-clip holster and wall-mount
bracket also available (model #: SK-9HBC)
•
Low battery indicator – LED flashes when battery drops below 2VDC
SK-910RB2Q 2-Channel Receiver
• Five programmable relay output modes:
- 4-Second momentary
- 1-Second momentary
- Toggle (ON/OFF)
- Latch
- Validity
• 11~24 VAC/VDC Operation
• Range: Up to 500ft (152m)*, 315MHz
• Independently programmable outputs
• Controls garage doors, gates, house lights, alarm panels or
other devices via remote
• Two LEDs indicate RF reception, learn mode entered,
transmitter learned, memory cleared, and relay output
mode
• Pushbutton programming, no need to cut jumpers
• Up to 15 transmitter button codes per channel can be
learned
• Compatible with all 315MHz SECO-LARM transmitters
SK-919TD2A-UP
SK-919TP2H-NUQ
SK-910RB2Q
*Actual range will vary greatly depending on the installation and operating environment
Also Available from SECO-LARM
®
:
SK-91ERSD
Increase range up to 1,000ft
(304m)* with the Extended
Range Antenna