Data Sheet

SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA, 92606
Copyright 2015 © SECO-LARM U.S.A, Inc. All rights reserved.
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to
change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Phone: [phone] | [phone] Fax: [phone]
Website: www.seco-larm.com | Email: [e-mail]
OpenFrameTransformers.docx
Model Output Voltage Amperage VA Input Voltage
ST-UV16-W50Q
16VAC
3.12
50VA
120/240 VAC 50/60Hz
ST-UV24-W50Q
24VAC
2.08
50VA
120/240 VAC 50/60Hz
ST-UV16-W100Q
16VAC
6.25
100VA
120/240 VAC 50/60Hz
ST-UVDA-W100Q
24VAC
4.16
100VA
120/240 VAC 50/60Hz
28VAC
3.57
100VA
120/240 VAC 50/60Hz
24VAC
7.50
180VA
120/240 VAC 50/60Hz
28VAC
6.43
180VA
120/240 VAC 50/60Hz
Output voltage: ST-2406-2AQ ST-2406-3AQ ST-2406-5AQ ST-2406-7AQ ST-2406-10AQ
6VDC
12VAC / 20VA
ST-UV24-W50Q
24VAC / 50VA
ST-UV16-W100Q
16VAC / 100VA
ST-UVDA-W180Q
24/28VAC / 180VA
ST-UVDA-W180Q
24/28VAC / 180VA
12VDC
16VAC / 40VA
ST-UVDA-W100Q
24/28VAC / 100VA
ST-UV16-W100Q
16VAC / 100VA
ST-UVDA-W180Q
24/28VAC / 180VA
ST-UVDA-W180Q
24/28VAC / 180VA
24VDC
ST-UV24-W50Q
24VAC / 50VA
ST-UVDA-W100Q
24/28VAC / 100VA
ST-UVDA-W180Q
24/28VAC / 180VA
24/28VAC / 210VA
28VAC / 350VA
Open-Frame Transformers
ST-UV16-W50Q 16VAC/ 50VA
ST-UV24-W50Q
24VAC/50VA
ST-UV16-W100Q 16VAC/100VA
ST-UVDA-W100Q 24/28VAC/ 100VA
ST-UVDA-W180Q 24/28VAC/180VA
Features:
• Shielded windings to reduce
Electromagnetic Interference (EMI).
• Selectable input voltage.
• Selectable output voltage.*
• UL recognized.
*ST-UVDA-W100Q and ST-UVDA-W180Q only.
(Model: ST-UV16-W100Q shown)
Technical Specifications:
ST-UVDA-W180Q
Match the ENFORCER Open-Frame
Transformers with the ENFORCER
Series Power Supply/Chargers
Convert low-voltage AC input power
to low-voltage DC output power.
• Regulated and filtered output voltage.
• Short-circuit protection.
• Thermal protection and
compensation.
• Built-in backup battery charger.
• Switches to backup battery
automatically in case of power loss.
• Fused protection for battery charger.
• 2 LEDs to indicate AC power input
and DC power output status.
• Compatible with lead acid or gel-type
rechargeable battery.
• Reverse polarity protected.
Transformer Selection Table:
ST-2406-2AQ
1.5A continuous, 6/12/24 VDC
ST-2406-3AQ
2.5A continuous, 6/12/24 VDC
ST-2406-5AQ
4.0A continuous, 6/12/24 VDC
ST-2406-7AQ
7.0A continuous, 6/12/24 VDC
ST-2406-10AQ
9.0A continuous, 6/12/24 VDC