Item Brochure

` Additional option for protecting the convergence measuring bolt
` The welded steel ring provides protection against
mechanical damage of the measuring point
` Must be ordered in conjunction with convergence bolt
` Weighs 1.90 lb (0.86 kg)
5 114 500 — Steel Ring Protection for Convergence Measuring Bolt
PRODUCT BULLETIN
Part No. tiP tyPe Weighs
5 230 000 5/8 x 11 Tip 6.26 lb (2.84 kg)
5 230 001 Wild-Style Tip 6.26 lb (2.84 kg)
5 230 002 10 mm Tip 6.17 lb (2.80 kg)
` Track rod remeasures the track axis
` Can be accurately measured over the track center
` The holder for the prism mounted in the track axis and is rotatable
` When using the prism in the tilt holder of the measuring point is 100 mm perpendicular to the track axis
` Insulation prevents electrical shorting between the two rails
` The stop on the opposite end ensures a clean application to the rail inner edge
` The attack pushes exactly on the reference height of 14 mm below the top of rail to rail
` All track benchmarks are supplied as standard for a track gauge of 1435 mm
` For concreting as measuring point
` Prisms and reflective target boards without any special
adapter can be attached to the Swiss-Style system
` Stud is galvanized
` Diameter 20 mm, ribbed steel
Part No. leNgth diameter Weighs
5 114 150 150 mm 20 mm 0.88 lb (0.40 kg)
5 114 200 200 mm 20 mm 1.15 lb (0.52 kg)
5 114 270 270 mm 20 mm 1.50 lb (0.68 kg)
5 114 350 350 mm 20 mm 1.94 lb (0.88 kg)
` For concreting as measuring point
` For placing a prism or reflective target plate on the 3/8-inch thread,
a plastic adapter is screwed in
` Supplied with a simple plastic cap
` Corrugated steel, 20 mm diameter galvanized
Part No. leNgth diameter Weighs
5 115 150 150 mm 20 mm 0.75 lb (0.34 kg)
5 115 200 200 mm 20 mm 1.01 lb (0.46 kg)
5 115 270 270 mm 20 mm 1.37 lb (0.62 kg)
5 115 350 350 mm 20 mm 1.81 lb (0.82 kg)
` The track has a bracket for tram or track shortened leg to allow the measurement in grooved rails
` With moving across the track axis for horizontal alignment
` With strong magnet
Part No. thread tyPe Weighs
5 263 000 5/8 x 11 inch 0.92 lb (0.42 kg)
5 263 001 Swiss-Style 0.79 lb (0.36 kg)
5 263 002 10 mm Stud 0.92 lb (0.42 kg)
` Column plate is made from anodized aluminum
` Three bottom anchor bolts are embedded
in concrete during installation
` With 5/8 threaded stud for Tribrach
adapter centered on the plate
` Weighs 2.29 lb (1.04 kg)
1 510 001 — Column Plate
` Anodized aluminum plate
` Three key holes for screws to mount the plate
` 5/8 inch threaded stud
` Tribrach adapter centered on the plate
` Weighs 1.81 lb (0.82 kg)
1 510 011 — Screw Mounting Column Plate