Product Manual

8
General Purpose Clamp
To secure the clamp to the detector, align the two dovetails of
the clamp to the grooves on the back of the detector. Slide the
clamp down onto the detector. A "click" will ensure the clamp is
securely attached.
Turn the clamping screw counterclockwise to open the clamp’s jaws.
Turn the jaws screw clockwise to tighten the general-purpose
clamp onto a rod or staff.
To remove the clamp, depress the thumb release tab and slide
the clamp upward.
1. Dovetail slots - attaches clamp to the back of detector.
2. Clamp lock tab and thumb release - tab for securing and
thumb release for removing clamp from detector.
3. Reference Bar - Top of bar is aligned with detector On-grade
location and marking notches.
4. Clamping Screw - tightens and loosens the clamp onto rods
and staffs by moving the traveling jaw.
5. Bubble Vial Holes - pre-drilled holes for optional bubble
vial kit screws.
1
3
2
4
5