Wi-fi Camera SE-ND201PT User Manual Welcome Thank you for purchasing a SE-ND201PT panoramic navigation Wi-fi Camera! This guide is designed to be a reference tool for the installation and operation of your security camera. 1. Download and install the latest version of the IPC360 app from the Apple App Store or Google Play Store on your smart phone or tablet.
Scan the IPC360 app QR code on the right co download and install, you can also each "IPC360 " on the App Store on Google Play Store to download it. Note: After installing the app, and before starting the app setup process, please make sure your phone is connected to the WIFI network you will be connecting your camera to. 2. Get your camera up and running 2.1 Connect the camera to the power adapter using the included USB cable, then plug the power adapter into a power outlet as shown below.
2.2 Please wait 30 seconds after plugging in the camera to allow it to initialize. The camera will begin rotating as part of its start up sequence and the red LED light on the front will blink when ready. Note: 1. If the red LED light keeps on and does not blink for a long time, Hold for 3 seconds to perform a factory reset. This will reboot the camera and clear all settings to factory defaults, including previously configured Wi-Fi settings, so you can set up your camera again. 2.
Micro SD card* to the slot as shown below.
3. Connect the camera to your phone or tablet Open the IPC360 app on your smart phone or tablet and sign up by inputting your email address, then sign in and enter "My camera" page, tap the icon "+" in the top-right corner to add a camera. There are two ways for you to connect your camera to the app, which is smart wireless mode and wire mode.
1. The IPC360 system will send a verification code by email to you email account that was used for registration. 2. The camera is available to 24GH2 band not 5GHz 3. Your Wi-Fi name and Password should not contain special characters like, @, or &. 4. Previewing live footage Use the PC360 app to watch real-time video on your phone.You can also record and save videos or images. 5.Reverting call PIR Alarm IPC360 security camera possesses a special function, that is the reverting call.
tablet, no matter where you are and what you are doing, as long as the network running normally. You will know what's going on there by confirming the message to watch the real-time video. The PIR sensor alarm method greatly reduces the false alarm rate, and the effective distance is 0-5 meters stable and reliable, without error triggering, which is not affected by ambient temperature,light,noise airflow and so on. 6.
with two fingers, buckle the slot into the bottom slot, tighten in clockwise direction) 7. Important safety guidelines 1. Please read this instruction carefully before use. 2. Clean only with dry soft cloth. 3. This camera is for indoor use only. 4. Only use attachments/accessories specified by the manufacturer. 5. UNPLUG this apparatus during lightning storms or when unused for long periods of time. 6.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
