Quick Start Guide

SETUP THEVIDEO DOORPHONE

1. AppDownloadandInstallation

(1) Please downloadand install the "OMGuard HD” APP to yourdevice.

2.InsertBatteries

(1) Unscrew the battery compartmentscrew

with suppliedscrew driver.

(2) Insert the batteries supplied.Make sure the

polarity is as indicated beforeinserting the

battery cartridge backto RVDP.

(3) After the batteries are inserted,the Push

Button illuminator will light upand _ash,

indicating RVDP isready for further setup.

*Note: If the illuminator isnot lighted,

press/holdthe Reset Button for 5seconds

until the illuminator lights upand _ash.

3. SetupRVDP via App

(1) While the pushbuttonilluminator is ashingRed& Blue,

launch the appand tap to add device.

(2) Scan QR codeto bring upthe DID or enter the DID manually

(The DIDsticker islocated at the back ofthe RVDP)

(3) Enter name for your RVDP(maximum20characters).

(4) Enter default Security Code:123456.

(5) Tap"Save" and follow in-appwizard to completethe setup.

ALC Electronics B.V.

Ericssonstraat 2

5121 ML Rijen | The Netherlands

sales@secuﬁrst.eu

www.secuﬁrst.eu

Brand

™

PAGE 1
SETUP THEVIDEO DOORPHONE 1. AppDownloadand Installation (1) Please download and install the "OMGuard HD” APP to your device. 2. Insert Batteries (1) Unscrew the battery compartmentscrew with suppliedscrew driver. (2) Insert the batteries supplied.Make sure the polarity is as indicated beforeinserting the battery cartridge backto RVDP. (3) After the batteries are inserted,the Push Button illuminator will light upand _ash, indicating RVDP isready for further setup.
PAGE 2
DOORPHONE INSTALLATION LIVE VIDEO* (1) Secure the wall bracket ona stable surface (2) Mount the RVDP ontothe wall bracket (3) Secure the RVDPvia the screw supplied. Note: (A) Battery Power Optionis beingillustrated here, therefore if youwish to power the RVDPvia existing doorbellwires or optional adaptor, please refer to owner's manual for moredetails.
PAGE 3
ChangeRingtone of the DOORChime 1. Use the secondbutton on the side of the Door Chimeto select the preferred ringtone. 2. Pressed the Pairing button on the Door Chimefor three secondsto enter pairing mode.(See illustration on the right) Blue light will start blinkingon the front of the Door Chime 3. Put the Video door phoneinto pairing modeby below two methods: I. II. Unplugthe ACpower of the Video door phone then plugin again. OR Removethe batteries then insert it again 4.