User`s manual

Before Using This Product
1. There are three different S2 models in order to provide optimum condition
for image quality and sensitivity.
2. Even if proper S2 model is used for your SLR camera, the S2 LCD display
image is not exactly aligned to camera viewfinder image information.
3. If S2 LCD displays well aligned image as picture ①, angle adjustment is not necessary.
4. If S2 LCD cannot display well aligned image as picture ② and ③, angle adjustment
is required for proper image display.
5. There are three kinds of metal insertion for angle adjustment. The thickness of
No.1 metal insertion is the smallest. The thickness of No.3 metal insertion is
the largest. The number of white dot represents metal insertion number as following
picture.
6. Inserting metal insertion between S2 and eyepiece adapter prevents lower part
image display cut off.
7. Adjusting metal insertion is not required after proper initial installation.

<No.1 Insertion> <No.2 Insertion> <No.3 Insertion>