User`s manual

Basic Operations

1. Attach eyepiece adapter to ZIGVIEW properly
before installing ZIGVIEW to camera.
2. Remove an eyepiece or eyecup
on the camera viewfinder.
3. Push Zigview downward carefully
onto the eyepiece adapter of the camera.
4. When installing or removing,
hold the front part of Zigview.
5. Pull the eyepiece adapter attached to
Zigview upward from the camera viewfinder for removal.

1. Press the power button for 1 second to power on.
Some images will be appeared on ZIGVIEW LCD.
2. When you turn on the Zigview first time after purchasing
the product, all parameters and displays are set
at factory values. If you turn off the ZIGVIEW
and turn it on again while using the product,
the previously set parameters are restored.
3. Press power button for 2 seconds to power off.
4. When not using for a long period of time,
turn the power off and remove battery.
□ Install the battery in Zigview for proper use. Zigview
does not operate with AC adapter alone.