User`s manual

Mode Selection
16
1. Pressing the Esc button on each operating mode
makes the mode move to mode selection screen.
2. Select the mode that you want by pressing
up and down buttons.
3. Press the Enter button for the execution of the mode.
4. If you press the Esc button not the Enter button,
a previously operating mode will be executed.
1. Digital View Finder : Basic function of ZIGVIEW that makes shootings
at various angles easy. Also you can use style functions for assisting
various shooting compositions.
2. Interval Shot (Simple) : Camera shutter is released according
to the number of total shot and interval time.
3. Bulb Shot : Long exposure for assigned time.
4. Time Shot : Long exposure for arbitrary time.
5. Interval Shot (Advanced) : It is possible to set the details of interval
parameters. Various interval setting methods are provided.
6. Motion Sensing Shot : A shutter release is performed when small
variations in the brightness level in the 9 areas of the LCD screen
are detected.
7. Environment Setup : Set basic parameters of Zigview.
- Adjusting screen size : adjust image size on LCD according
to the screen in the camera viewfinder.
- LCD brightness : adjust LCD brightness
- Video effect : select color or B/W image.
- Battery and logo display : decide the display of battery level
and initial logo.
- Language selection : select a language for display of information
and menu.
ZIGVIEW S2 has 6 operation modes and 1 setup mode
☞ About modes
Operation Mode selection (1.1)
□ Digital View Finder
□ Interval Shot(Simple)
□ Long Exposure(Bulb)
□ Long Exposure(Time)
□ Interval Shot(Advanced)
□ Motion Sensing Shot
□ General Setup
1