User`s manual
General Setup and Size Adjustment
17
When ZIGVIEW is installed, screen sizes may vary in right, left, up, and
down depending on cameras. Adjust the screen size to fit your camera.
Adjust backlight brightness of Zigview LCD
1. Select the General Setup Mode on the operation
mode selection screen.
2. Select the Size Adjustment and press the Enter button.
Arrow marks to the left side will be appeared.
3. Adjust left side by pressing the Up and Down button.
4. Press the Enter button, then arrow marks indicate
upper side. Adjust upper side pressing the up and
down button.
5. You can adjust left, upper, right, lower side
for every Enter button.
6. After completion of size adjustment, press the Esc
button for return to the General Setup mode.
1. Select the General Setup mode on the mode
selection screen.
2. Select the Back-Light Brightness and press
the Enter button.
3. Adjust the brightness value by pressing Up
and Down button
4. Values in the range of 1 to 5 can be selected. Value 1 is the darkest
and value 5 is the brightest.
5. After the completion of the value adjustment, press the Esc button
for return to the menu item.
+ -
+ -
+ -
+ -
2
2
2 4
5 6
General Setup
□ Screen Adjustment
□ Brightness
□ Battery/Logo
□ Screen Color
□ Video output
□ Camera Ready
□ AE/AF Time
□ Load/Save
□ Language
☞
1
Both
Color
NTSC
10
0.5
Save1
English
General Setup
□ Screen Adjustment
□ Brightness
□ Battery/Logo
□ Screen Color
□ Video output
□ Camera Ready
□ AE/AF Time
□ Load/Save
□ Language
☞
1
Both
Color
NTSC
10
0.5
Save1
Bglish