User`s manual

Safety Precautions
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Do not use any accessories such as power adapters other than those recommended
in this user's manual.
Connect the power cord thoroughly, and do not touch the power cord with wet hands.
When pulling out the cord, do not hold the cord, but hold and pull out the plug part.
Do not damage, bend or twist the cord. It may cause electric shock or a fire.
Do not let dirt in the connected parts or cable connections.
Charge the battery at the temperature of 0 to 40 °C.
When excessive heat, smoke or smell is generated while charging a battery , remove
the battery from the power outlet immediately.
Place the battery-charging devices out of the reach of children. The cord may strangle
or electrically shock a child.
Do not place the cord near a heat-generating object. It may deform the cord or cause
a fire or electric shock by melting the insulated parts.
If the product is dropped to the ground and the case is damaged, do not touch the
built-in parts. It may cause electric shock. Call the nearest Customer Service Center.
Do not disassemble or rebuild the product. It may cause permanent damage
to the product and malfunctioning that can harm people.
Place the product out of the reach of children. Damaged product may result in injury.
Before using the product on an airplane or in a hospital, you must check whether
such usage is allowed. Electronic waves produced from the product may cause
malfunctioning of devices.
Do not keep the equipment in a place where dirt and moist accumulate easily.
It can cause a fire or electric shock, or damage the product.
Do not hold the product alone when the product is installed in the camera. Due to the
weight of the camera, it may damage the connected part between the product and
the camera or the product.
Do not clean the device with paint thinner, benzene or other volatile solution. It may
cause a fire or harm the human body.
Follow these safeguards and use the equipment properly to prevent
injury, death, and material damage.
3