User`s manual
Interval Shot (Advanced)
30
3. Shot Interval : set interval time between consecutive two shots. The interval time
has the range from 1 seconds to 99 days, 23hours, 59 minutes, and 59 seconds.
The interval time can be set every 1 second unit.
4. Number of Shots : set the total number of interval shots. It has the range of 1 ~
999999. The value can be changed with 2 digits.
The first 2 digits 123456
The next 2 digits
The final 2 digits
5. Total duration of Interval shot : set the whole duration of interval shot. It has
the range from 1 seconds to 99 days, 23hours, 59 minutes, and 59 seconds.
6. Exposures : set the number of exposures an interval shot. It has the range of 1 ~ 99.
Ex) Shots (10) x Exposures (3) = 30 exposures.
If the total number of interval shot is 10 and the number of exposures is 3,
30 photos are taken.
7. Exposure duration : set spacing time between two consecutive exposures. It has
the range of 0.5 second ~ 99 minutes, 99.9 seconds.
8. Bulb shot Duration : set exposure time of each shooting. It has the range from
0 second to 23hours, 59 minutes, and 59 seconds with the unit of 1 second.
If 0 second is specified, B shot duration is ignored. If B shot duration is bigger than
shot interval or exposure spacing(Edur), ERROR will be displayed at operation status
field and interval shot will not be executed..
9. LCD : controls power saving functions during interval shot. During the waiting time
to the next shot in playing interval shot, LCD and its related power can be shut-
down. Even though LCD power is shut-down, interval shot is executed normally.
Pressing any key during LCD power-down state powers the product on and
the information is displayed on the LCD for a moment.
- On : LCD power is always on.
- Off : LCD power is always off
- S.ON : If spacing time between two consecutive shootings is longer than 10
seconds, LCD power becomes on 5 seconds earlier before shooting, and it becomes
off 3 seconds later after shooting.