User`s manual
34
3. Sensing Mode : Select the motion sensing mode.
- 9 sector mode : Image is divided into 9 sectors, then motion is sensed in each sector.
If above 1 sector is sensed, shutter is released.
- All image : Motion is sensed in all image areas. If sensed, shutter is released.
4. Sensing Threshold Value : set sensing threshold value. If the difference between
previous brightness value and the current brightness value exceeds this value,
motion is sensed. It has the range of off, 1 ~ 99. If you select off in a sector, motion
is not sensed in the sector.
5. Motion Sensing Interval : Motion sensing is performed at every time as specified
in the motion sensing interval. For example, if the motion sensing interval is
5 seconds, Zigview compares the brightness values every 5 seconds. Normally,
the small value is set for slow objects, and the large value is set for fast objects.
6. Motion Sensing Delay : After the shutter is released by motion sensing, motion
sensing can be suspended for motion sensing delay time for preventing erroneous
sensing from mirror action.
7. Number of exposures : indicates the number of shootings per sensing.
It has the range of 1 ~ 99.
Ex) the number of motion sensing (10) * the number of exposures (3) = 30 exposures.
8. Exposure duration : time spacing between two consecutive exposures.
It has the range of 0.5 second ~ 99 minutes, 99.9 seconds.
9. Bulb shot Duration : set exposure time of each shooting. It has the range from 0
second to 23hours, 59 minutes, and 59 seconds with the unit of 1 second.
If 0 second is specified, B shot duration is ignored. If B shot duration is bigger than
the exposure spacing(Edur), ERROR will be displayed at ‘Operation Status’ field
and the motion sensing shot will not be executed.
9. LCD : controls power saving functions during the interval shot. During the waiting
time to the next shot in playing motion sensing shot, LCD and its related power can
be shut-down. Even though LCD power is shut-down, motion sensing shot is
executed normally. Pressing any keys during the LCD power-down state powers
the product on and the information is displayed on the LCD for a moment.
- On : LCD power is always on.
- Off : LCD power is always off
- S.ON : LCD power becomes on when the motion is sensed, and it becomes off
3 seconds later after shooting.
Motion Sensing Shot