User`s manual


36
1. Power off the Zigview, and remove the latchs.
2. Separate carefully the image sensing part and
the display part pressing separation button.
3. Connect the transmitter ene
sensor and insert the latchs.
4. Connect the other end of RV01 cable to the
display part, and insert the latchs.
5. Power on the Zigview, and confirm to see image
on LCD. If there is no image, check
the connection.

In remote monitoring, you can control camera shutter
observing image on LCD.
1. Install the RV01 transceiver.
2. Connect a proper shutter release cable between
Zigview and camera remote release port.
3. Press the shutter on Zigview if you want shooting.
□ Connecting RV01 when Zigview is powered on may damage
Zigview and RV01. Please power off Zigview for the install
of RV01.
Remote monitoring
The image sensing part and the display part of the Zigview can be separated
via video transceiver cable RV01. Then, you can remotely monitor the view
finder image from a distance.
<Remove latchs>
<Separate Body>
<Connect Transmitter>
<Connect Receiver>
□ RV01 is optional product.