User's Guide

Doc No.: A22270882 Rev. B ECO: 13058 Date: 04/09/18 9
SECTION 2 POLICY AND PROCEDURES
4. Test the Transmitter using the Tester to verify the ID code as shown below. The strap should be aligned front to back.
5. Apply the transmitter to the infant's ankle comfortably (not too tight). During daily care, check to see if strap needs to
be adjusted.
6. Trim the excess strap down to the top of the transmitter leaving enough to make adjustments later if necessary.
Figure 2-6 - Testing a 90° transmitter
Figure 2-7 - Example of a transmitter attached to an infant.