User's Manual

Doc. No.: A03490690 Rev.: 1 ECO: 12274 Date 11/10/2016 13
Locating Node Positions
All node locations will be pre-determined and the mounting locations will be provided as part of the installation
specific documentation. It should be noted that the locations specified may have to be adjusted during final testing
to ensure proper coverage and tag detection.
Prior to finalizing the node mounting, it is recommended to temporarily place the node at the specified location
using painter tape. Once the final location is determined, then the node can be permanently mounted.
See Appendix x for an example of the installation location document.
Connecting the ENVisionIT RTLS device into the system
Once the nodes are connected to power and the network, they must be configured into the ENVisionIT configuration
tool.
Refer to the ENVisionIT users guide for detailed steps to add a device into the system.