User's Manual

Doc. No.: A03490690 Rev.: 1 ECO: 12274 Date 11/10/2016 16
RTLS Recognized Badge Types
The nodes recognize the following types of badges and tags
Economy Asset Tag
A21450906-23 (Ch 2)
A21450906-53 (Ch 5)
Provides tracking of valuable assets through out a
monitored and includes a programmable button.
RTLS Security Tag
A20440930-2 (Ch 2)
A20440930-5 (Ch 5)
Provides UWB location information and has a
programmable status push button. Has door management
capability
RTLS Multi-Vision Tag
A20450930-2 (Ch 2)
A20450930-5 (Ch 5)
Provides UWB location information and has a
programmable status push button and has door
management capabilities. It also has cutband capability.
Staff Safety Badge
A21450910-21 (Ch 2)
A21450910-51 (Ch 5)
Provides UWB location information and has a
programmable push button.
Table 3 - RTLS Tags
Location Specific Mounting
Any location specific mounting data will be added when known. The typical Node locations are pre-determined and
a location map will be provided to the installer.
General process will generally consist of a pre-site visit by a Secure Care trained distributor to take an initial facility
scan to determine node placement.
If the system is a wireless system, a Wi-Fi scan is done as well.
Once node placement is determined, power wiring is calculated along with the number of power supplies. Then the
installation team will be provided with the node locations and power requirements and begin planning and preparing
for node install.
Any Exit panels, EXIU and/or KinderGUARD devices will be installed at this time as well. The EXIU and/or
EHUB should be connected to the Secure Care system router for the ENVisionIT network.
During this time the PC will be set up and ENVisionIT software installed at the factory. All available node specific
information will be factory loaded into the system.
Once nodes are in place, the ENVisionIT software will be configured with the device information for the facility.
When all devices are configured into the system, a system wide test will be performed to determine accuracy and
coverage.