User's Manual

Doc. No.: A03490690 Rev.: 1 ECO: 12274 Date 11/10/2016 26
Figure 5 - Indoor Node Flush Mount Rear Cover
A typical Flush mount wall box as provided by Secure Care.
Figure 6 - Flush Mount Enclosure Secure Part Part# 461
After routing wires to the enclosure location, use the enclosure as a template to mark and cut the wallboard for
inserting the enclosure. Apply strain relief connector to required knockout locations. Route wires through strain
relief connector. Tighten strain relief connector around the wires. Wires should withstand a pull of 35 pounds
without slipping through the connector. Insert the enclosure into the wall.