User's Manual

Doc. No.: A03490690 Rev.: 1 ECO: 12274 Date 11/10/2016 29
Ceiling Mounting the ENVisionIT RTLS Node
Both of the ENVisionIT RTLS nodes may be mounted on the channels of a suspended ceiling using the optional
mounting clip. The clip is a two piece unit and clips onto the channel using a unique Secure Care mounting. This
clip then in inserted into the center mounting hole on the nodes rear cover.
Refer to the pictures below for the ceiling mount clip usage.
The clip is a two piece assembly that inter-locks onto the track of a suspended ceiling.
Figure 9 - Ceiling Clip Installed on railing
Figure 10 - RTLS node base installed
Once the unit is installed on the grid, ensure access for power and network will not interfere with the node.
Please verify with local codes prior to mounting these nodes on a suspended ceiling.