User's Manual

Doc. No.: A03490690 Rev.: 1 ECO: 12274 Date 11/10/2016 34
SECTION 11 TESTING
SYSTEM TEST
This section will provide the test procedures that will help ensure the ENVisionIT system is working correctly and
the steps necessary to repair any failing components of the system.
Testing node coverage
Using a test tag, go to at least 5 locations within the monitored area and verify the location is reported correctly on
the ENVisionIT system.
Testing tag coverage
Using the test tag, monitor the tracking of the tag as it is moving around the area being monitored verifying the tag is
seen in all locations and there are no dead spots. Dead spots may develop after installing the system as equipment
and furniture get moved blocking or reducing coverage.
Testing Location Accuracy
Verify tags and devices are correctly displayed with the correct location on the system.
Testing Network Connectivity
Normal network troubleshooting and testing should be used.
Ping devices
Network logs
Cable tester
Wireless test tools