User manual

Network Setup
112
• Enter the DNS Address to issue the DHCP clients. If this field is left blank, the SG
unit's IP address is used. Leave this field blank for automatic DNS server
assignment. If your SG unit is configured for DNS masquerading, you should either
leave this field blank, or enter the IP address of the LAN port of the SG unit.
• Optionally enter a Domain Name suffix to issue DHCP clients.
• Optionally enter IP address of the WINS server to be distributed to DHCP clients in
the WINS Address field.
• Enter the Default Lease Time and Maximum Lease Time in seconds. The lease
time is the time that a dynamically assigned IP address is valid before the client must
re-request it.
• Enter the IP address or range of IP addresses (see the appendix entitled IP Address
Ranges) to be issued to DHCP clients in the Address Range field.
Click Finish.
DHCP addresses
To view the status of the IP address the DHCP server is configured to distribute, click the
Edit icon next to the appropriate network interface, then click the DHCP Addresses tab.
Address list
For each IP Address that the DHCP server is managing, the Status, Hostname, MAC
Address is displayed.