User manual

USB
240
6. USB
Note
SG565 only.
The SG565 has two USB (Universal Serial Bus) ports to which you can attach USB
storage devices (e.g. hard drives, flash drives, card readers), USB printers, USB network
devices and USB narrowband (non-DSL) modems. A USB hub may be used if you need
to attach more than two USB devices simultaneously.
Note
USB DSL modems are not supported at this time.
The following walks you through configuring your SG unit to use the aforementioned USB
devices, and how to share printers and network attached storage with a Windows
network.
Attach the USB device
Ensure that the USB device is connected using a USB cable and that the device is
powered on. Some USB devices, such as USB flash drives, draw their power directly
from the USB port, others may require a separate power adapter.
USB Mass Storage Devices
USB mass storage devices can be attached to the SG unit for use as a print spool or to
share with your Windows network as a network attached storage device (NAS). A typical
use for NAS is for using the SG unit as a network file server.
USB mass storage devices include USB flash drives and keychains, USB flash card
readers loaded with flash cards, USB hard drives, and certain digital cameras and
portable music players.