User manual

USB

245

Command (m for help): p

Disk /dev/sda: 5 heads, 50 sectors, 1024 cylinders

Units = cylinders of 250 * 512 bytes

Device Boot Start End Blocks Id System

/dev/sda1 1 1024 127975 b Win95 FAT32

Delete any existing partitions by typing d the entering the partition number, e.g. enter 1 to

delete /dev/sda1.

Create a new partition by typing n then p for primary, then the partition number.

Note

The SG unit support primary partitions only, so you are limited to four partitions.

Enter the cylinder for the partition to start on, generally the default is fine. Enter the

cylinder for the partition to end on, or a size for the partition with +(size in mb)M.

Command (m for help): n

Command action

e extended

p primary partition (1-4)

Partition number (1-4): 1

First cylinder (1-1024, default 1):

Using default value 1

Last cylinder or +size or +sizeM or +sizeK (1-1024, default

1024): +64M