User manual

Getting Started

Connect one of the ports of network switch A (A1 – A4) directly to your PC’s network

interface card using the supplied network cable.

Next, modify your PC’s network settings to enable it to communicate with the SG unit.

Click Start -> (Settings ->) Control Panel and double click Network Connections (or in

95/98/Me, double click Network).

Right click on Local Area Connection and select Properties.

Note

If there is more than one existing network connection, select the one corresponding to the

network interface card to which the SG unit is attached.

Select Internet Protocol (TCP/IP) and click Properties (or in 95/98/Me, TCP/IP -> your

network card name if there are multiple entries) and click Properties.

Select Use the following IP address and enter the following details:

IP address: 192.168.0.100

Subnet mask: 255.255.255.0

Default gateway: 192.168.0.1

Select Use the following DNS server addresses and enter: